Search results

named my 1009 "The Toad" hey its a short squatty truck and its green

which seal is it input or output or is it inside, that seems high to me without knowing which seal it is.

just a heads up dont do the steering wheel brake or gas pedals if you get in a accident and the other people have a good lawyer they could get you for that saying you slipped or something

If you need the install manual for the heaters to help you uninstall let me know as I have it. Removal should be way easy compared to install lol. If you decide to keep it and it still runs dont run it on diesel the newer low sulfer crap will burn up your heaters wicks. I converted to kero and...

anthother trick I use to help bleed the system is to park the vehical on a hill with the front end facing up this will help to get rid of the air as well when your bleeding it. sounds funny but it works. if that does not work the oother option is to pull a vacume and then suck the coolant in...

yep like idM1028 said only made to fit the full size m-16s. When I was in we just moved the upper holder down some and that helped for our m-4s.

"The fuel in water sensor you do not need with these days fuel filters" why not my water in fuel light came on about a month ago opened the drain on the bottom of the housing and water came out how would I know this without the light just wondering? I also change my filter once in the summer...

I hate reading stuff like this it makes me feel that much older! :)

best fastest way for me at least is to just jump from the front battery (12volts!!!) straight to the fan. Of course this is a temp fix as it will run all the time but it will get ya home. I had this happen to me last winter, since then I have made up a 4 foot long wire with a alligator clip on...

Just got one myself of fleabay if that helps my truck actually shifts right now change all of your vacuum lines first cheaper way to go if that does not work then I changed the switch.

I added both the air and coolant arctic heaters works great and almost instant heat! I also have a windshield washer fluid heater that helps year around. send me a pm if you would like some more info on where to get arctic heaters and parts I also have the install manual if you are interested...

My arctic heaters work great can be pulled off line as they have quick connects for the coolant lines. If you do use the heater from above make sure it is rated to handle coolant and not just fresh water. I converted my arctic heaters to kero as the diesel plugs the filters quick was told that...

actually the arctic heaters get there fuel supply from the area up front near the firewall if you turn your front tires all the way left like taking a left turn then lift the rubber inner flap on the right side look under it and you will see the fuel line with a t fitting this is where the...

Should be able to as all the A/C truck ones now days still seem to be copper brass

I like those as well but have my kero jerry can for my arctic heaters there now and thats staying till I leave minnesota winters!!

well tell ya what I had to do. first aluminum one sucks! I went to my local radiator shop and he could not get one but he had a NOS core setup for an A/C truck he unsoldered my old cap with the tubes and replaced it onto the A/C core after taking the A/C cap off works great not cheap though...

st.cloud mn area

similar issue as what I had. I had both rebuilt still same issue well got bored one day and popped one open as I don't trust any ones work any more and what did I find? they never replaced my voltage regulators. Spent 30 bucks for two new ones and about an hour total of work now I am way up in...

not sure if you have one or not but get a 24 volt solergizer. I can leave my truck for a week or more and will still be showing good on the volt meter after starting. before I had it my volt gauge would be near the yellow till I drove for a bit and recharged it. Sun is free and the chargers can...

I just bought 2 rubber furniture feet caps same as what goes on the base of a cane about 2 bucks and any hardware store should have them. A dab of silicone to seal them and been leak free for over a year!