Search results

If you still need the info here are some pictures. It a 2002 M1083A1. The front mud flap basically lines up with the rear of the muffler. Maybe a 1/2 inch just behind the rear of the muffler. The bottom of the mud flap is about 6 inches out from the front of the rear intermediate tire. Hope...

Wow, I learned a new word today, I had to look up “Shills”. Good to know ! …and I agree.

I watched that several times and the one by "Fastidious Restomods" on Abel, before I tore into mine. If you go to the above video and stop it at 6:27, mine didn't have the pipe that is in the manifold that is beside the dip stick. That was just one of several differences. Do I need that pipe?

Let me know how that goes. I’m curious to see if my A1 is any different then yours. Be safe!

With some advice, this was the kit I purchased.

Reinstalled it last night but haven't tried it since I cleaning it. I will get to that today hopefully if weather permits. But, before removing the pump nothing coming out of the breather, I removed the breather and check it and it was clear. It sounded like it was cycling but nothing moving...

Yeah that maybe, but when it's your first time rebuilding or taking one apart you kind of rely on the TM's and/or the instruction sheet that comes with the kit. When things don't match up to what your seeing in the TM's and the instruction sheet it is concerning. I believe myself to be...

Check with Wheelspinner.

Third From Texas, Here are some pictures I took of the pump. The first picture show the relief value on the side and not in the back. #2. Shows the pump cracked opened. #3. Shows no retainer, no preformed packing, no retaining ring or O ring. #4. No O ring #5. This is the air motor, top view...

Well, I cleaned all the parts, they weren't that bad considering the fluid tank was nasty! Was working on it for several hours and I took my time since the TM's wasn't a lot of help and just got it back together. If I have to do it again I think I could do it all in less then an hours next time...

Pump wasn't working. Tried everything to get it to work even with the suggestions from SS member. Took it off today to clean and rebuild it and I'm in it now. So I'm using the TM to get it apart, It may look like the A0 on the outside but the interior of it is very different. I guess I'm going...

Quick question, is the air/hydraulic pump the same in the MTV A0's vs the A1's?

Thanks, I'll give that a shot.

While working on the engine a couple weeks ago and trying to get it to start I found that the fuel tank pickup was semi clogged and not letting enough fuel through. I checked the fuel tank and I found that the pickup tube was damage where it threads into the tank. It looked like someone stripped...

Bigfan, I've been working on my own newly acquired and my first MV myself. It can become challenging and a PITA at times, but I love it, it keeps me on my toes. With that said, keep your head up, and as they say, "hope for the best but prepare for the worst". There will be good times and...

Pump has cover over it. I ran all the lines and they are connected up correctly. Won't be able to get back to it until Friday and I will do what Ronmar suggested and see what I can find. Thanks again to you and Ronmar!!!

No, on finding part numbers, I have the TM parts manual. Sources, maybe another issue. I also have the TM to rebuild the unit. I'm starting to get use to the TM's but it will take me some time, a lot of pages!!! With trying to do several project on the truck at the same time and trying to find...

That's it, I don't know. Engine not running yet so I have only used the manual hand pump and with no fluid returning to the hand pump, is it a air/hydraulic issue, hand pump issue or? With it being almost 20 years old I'm sure it is probably gummed up. The fluid coming out was nasty.

I got my M1083A1 I found that the cab lock latch was leaking. After sometime I got the correct latch repair kit and fixed the leaking cab latch. I wanted to rebuild the air/hydraulic power unit but have been unable to find a rebuild kit as of this thread. I filled the manual hand pump and the...

Just went though the same problem your having now. So, how did you do? Get it working?