• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. T

    M1079 government cost estimate? 2008 model.

    This is a 1998 that just sold in PA recently. Look at the pictures and there is a "cost" $$$ on picture #5. I'm sure the newer years cost more though...
  2. T

    Looking for FMTV CTIS Valve rubber diaphragm...

    Called and sent email. Scott called me back this afternoon and said that he has 30 diaphragms and just listed them on his website! That’s Scott and Suprman!
  3. T

    CTIS right angle fitting

    Nice!(y);) Ordered a couple myself.
  4. T

    Looking for FMTV CTIS Valve rubber diaphragm...

    Yeah, I tried their website several times over the last several days and could get on. I just tried them again and was able to connect, however their website states they are out of stock also. Is there a part number for this diaphragm? Is there a cross reference for this part? Thanks for the...
  5. T

    Looking for FMTV CTIS Valve rubber diaphragm...

    Been looking for the CTIS wheel valve rubber diaphragms and can't find any. Didn't see anything on the parts spreadsheet. I don't even have a number for them. Is there a diagram of the valve itself showing the internals in the TM's? If so I must have missed it. Anybody know where I can get...
  6. T

    CTIS right angle fitting

    Ditto, on the same boat. I've been looking for them for several weeks now. Found this one here: https://midwestmilitaryequipment.com/replacement-lmtv-mtv-fmtv-ctis-wheel-elbow/ Not sure if it is NOS or something that was made aftermarket, and it is way too much $$$ for me, for what is. And...
  7. T

    CTIS banjo bolt seal

    Midwest M. E. Just order some for my new tire install and CTIS rebuilt. Anyone know where I can get the CTIS valve rubber diaphragms at . Check all on internet and spicer dealers but I couldn’t find any. Anyone? Thanks.
  8. T

    Door Rod Clips (Where Our Vendor/Scalpers Get Them)

    There is someone out there selling the plastic ones from a 3D printer and not cheap!
  9. T

    MV Addiction filled. Reis the Beast M1078A0 is born

    Good to hear there was no damage and that you were able to get home okay. It’s good to know there are still good people out there that will help out a strange in need!
  10. T

    MV Addiction filled. Reis the Beast M1078A0 is born

    Mmmmmmmm, Harbor Freight.
  11. T

    Fording Kit for the LMTV

    Under the FAS site for the FMTV's under Performance Characteristics is states the water fording without kit is 36" and 60" with kit. But gives no kit info. https://man.fas.org/dod-101/sys/land/m1078.htm
  12. T

    Cab load sensor valve rebuildable ?

    There is one on the auction site with make an offer. However, the video seems to show that it could be easily rebuilt with a few O-rings...seems to be the cheaper way! Good luck! :-D
  13. T

    MV Addiction filled. Reis the Beast M1078A0 is born

    Oh, okay the tie rod. Yeah, that should definitely be straight!
  14. T

    MV Addiction filled. Reis the Beast M1078A0 is born

    For the hand pump, I didn't do this yet so I'm going to give this a try, the hydraulic fluid restrictors in the manifold. Can't hurt, at least I'll know they'll be clean afterwards.
  15. T

    MV Addiction filled. Reis the Beast M1078A0 is born

    By the way, anyone have a straight drag link laying around, 24P Figure 160, I 1. don't care about the rod ends. I am sure mine is slightly bent. Unless your is badly bent, the one on my truck and the spare both have a bend in them. Are they bad? You got me thinking now! These NOS I found...
  16. T

    LMTV - Sound Proofing & Insulation Mods (Post Your Proofing)

    One M134 minigun would work for me.
  17. T

    RIP Andrew Lukaesko - aka Scrounger

    RIP!
  18. T

    LMTV - Sound Proofing & Insulation Mods (Post Your Proofing)

    If I could find a couple of working 50’s without paying a kidneys, a right arm and a left nut for them and they were legal to possess I would!!! :grin:
  19. T

    LMTV - Sound Proofing & Insulation Mods (Post Your Proofing)

    That looks very cool but I bet you’d have a hard time finding one, or find one that would fit. If you did I bet the cost would be mind numbing. The sun roof is nice but not sure if I would go that direction or not…only time will tell. :p
  20. T

    LMTV - Sound Proofing & Insulation Mods (Post Your Proofing)

    I seen the "LED Lighting", "So you want an LMTV", "Cheap Tricks" and "Sold", etc., but I missed this one o_O. Thanks!!!
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks