Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Ooops im sorry i should have paid attention when reading.
But who here would know part numbers for a manual transmission in this forum?
im sure 99% of cucv owners have a automatic transmission
you mean flexplate... If there are different part numbers and they don't show them as interchangeable at rock auto I would assume they are not swappable.
I have not noticed any wear and yes youre right these injectors for the most part have under 100k miles on them. Its crud and carbon that collects and make these work less efficient. You noticed i have not touched the shims. I noticed a bit of a positive change, but i want to changr out the...
So here is what I have done to clean my injectors. I an not saying this is the way it is supposed to be done. I am just describing what I did and what seemed sensible to me.
your experience may vary. I didn't find much info or photo's of how the injector look and come apart and so I decided to...
NewEra, What year is your M1078?
As Suprman already said the fan switch is normally closed, which keeps the fan on. When the solenoid opens the fan stoops spinning. There is no override for off roading other than the Fan switch, which is made to keep the fan from shredding to pieces when it...
Yes, it is a 30/70 distribution, pressing the mode means it goes onto 50/50. The troubleshooting for the cooling fan is in the -30 TM's troubleshooting section. Sometimes it's quicker to get some info beforehand. A hitting the ground running sorta thing.
So does that mean the Cooling fan is off all the time? Because FMTV have permanent 4x4 wheel drive. Last time I checked on mine anyway.
-Check if the circuit breaker is tripped CB22 if not then
-find the cooling fan solenoid behind the passenger kick panel.
take off the connector and check for...
I read about the viton stuff that it snaps at the connectors with time.
Actually Ive read about it here.
Did you have a hard time getting the lines on with clamp? It seems a tight fit against the injector and original hose with clamp already.
This all sounds very rhetorical. Of all of the questions you ask in this post, you are answering yourself right there.
good luck, I doubt that you'll get it for $500, though. It might be interesting to see how much it will sell. Is it an online auction?
You are in MO, right? It might even be...
Is that not the torque value of how much the injector is supposed to be torqued to the engine block?
or is the torque value of the injector halves the same?
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!