Search results

Nope, they are A3's. Notice the up sloped hood (one of the reasons I think the a3's are so **** hidious) on the first pic.

Why didn't you bid on it?

Ive heard when the FDC is bypassed the fuel needs to be turned down.

http://www.steelsoldiers.com/safety/7031-brake-fluid-how-tell-kind-you-have-dot-3-dot-5-a.html

Are you sure about that? I ask because I have 7 waiting in Glens yard. That nearly 3k lbs

Contact this guy, see if he has any info you could use. http://www.steelsoldiers.com/vehicles-sale/85367-89-f350-4x4-diesel-flatbed-plow.html I would think if it were an AF truck it would be painted blue.

CTIS = yes Gun ring =yes

To both MWMULES and 91W350, Thanks. Now I just have to tell the wife I have to ge down and pick upsome trailers.

Like any new (or used) vehicle you buy you should be ok with the paperwork you get from GL. If I sell my civy vehicle to someone I give them a bill of sale and pull my plate and they drive away. You can get Ins. with just the VIN. As for driving off Ft Lewis that I do not know. If you have...

That would be the scorpion. THE original "home-built" tube buggy that started the whole craze of tube-buggies.

Mine (for the time being)

Throw those bows in my goodie pile. (I'll be on the lookout for a set of troop seats and cover to go with them also.

SMV signs are supposed to be used only by vehicles that are limited to something like 10-20mph. Generally the law is 40 min on the interstate so you should be fine, however if you are really concerned with your safety you should avoid the intersate all together. It has been my experience that...

Are my goodies still there? I just had a visiter not 10 min ago looking at the M715. (fingers crossed)

Looks like an a3 model. A3's have the wider bed with widerfender flares with the HMMWV rims and tires. Check to see if it has the offset axle. (hard to tellfrom the pic but it looks like it may)

Are the flat tires on the front? If so I would be very weary of using those tires there. GL will not air up the tires when they move trucks around the lot and often the tires are already shot.

Wow, how did this go so far and no one brought up the one that was built as a movie prop? http://www.steelsoldiers.com/deuce/74095-should-i-build-another-mrap-need-your-advice-criticism-please.html True, its not a bobber, but same concept. Same problems.

The holes should be there. The poles go up where the brace is on the back of the cab. The brace that spans the seam between the corner piece and the back panel of the cab.

Is the bed on the M116a3 alum.?

You can already do that by aquiring all the parts that the late model deuces have that already have the dual brake system.