• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Hard Head

    special charger for AGM batteries?

    I use a 200 amp Schumacher charger to heat them up for an couple hours then switch to a pulsetech X2 xtreme or NOCO Genius for dual battery installs such as every generator I have. I did the same for my vehicles and I use either the pulsetech or noco chargers. Both have brought and maintain...
  2. Hard Head

    MEP-003 and AC test

    I have 2 FDECU-4's. See the link for the FDECU manual. I am also interested in connectors! I would like to use both to test my generators and later condition my paint room. http://operatormanuals.tpub.com/TM-9-4120-411-14/
  3. Hard Head

    Dual fuel tank install

    Hi Rusty. I am glad you asked since I forgot to do this. My Bad!!! I will add a 3 way ball valve and tie it to the main / aux tank switch so it syncs with the tank. Thanks!!
  4. Hard Head

    5ton trucks for wildfire watertender service

    Numbers Will Not Vary Although payload determination may vary by manufacturer, the GVWR and GAWR (gross axle weight rating) on the certification label are standardized and absolute. Only the manufacturer — or an upfitter that started with an incomplete vehicle — can set the GVWR. There’s no...
  5. Hard Head

    M925 a1 armored crew cab

    Cool vehicles for ideas. If I could only win the lottery! https://www.youtube.com/watch?v=cDoRmT0iRic or https://www.youtube.com/watch?v=Yqp67Pd55wM
  6. Hard Head

    M925 a1 armored crew cab

    I found mine at a lumber company in Ohio believe it or not. Seems one if the suppliers went bankrupt and their items were auctioned off. I bought one way heated windshields for HUMVEEs. You just have to mount in the HUMVEE frame after you make it into a prow shape since it is too wide for the...
  7. Hard Head

    M925 a1 armored crew cab

    I have 4 caiman grills, bumpers, winch mounts, etc. I am working on changing out the hood and grill on my 923A2. Here is a pic of how the front end is configured.
  8. Hard Head

    Dual fuel tank install

    Question! I have a backup tank in the bed of my 5 ton. Currently I manually transfer via a pump with nozzle on that tank. I am thinking about using electric ball valves and putting a tee into the current fuel line from the main tank where the line connects to the first fuel water separator...
  9. Hard Head

    Acquired a Military surplus load bank

    I was thinking about using multiple 5k and 10k 3 phase heat strip units in a duct with a very good blower. It is cold in my warehouse :) I don't think I can afford a real tester.
  10. Hard Head

    M939 cab armor kit

    Some folks put MRAP RG31 or RG33 bumpers and grills on the front. Great for winch mounts and also if you are using the truck in the timber business it gives you better radiator protection from tree limbs. I put an armored steel pate in front of and under my 60/40 proportioning valve to protect...
  11. Hard Head

    MEP-802 and 803 Main generator tip.

    Do you have the info on updating the diode bridge? Might as well update the diodes when I add this modification.
  12. Hard Head

    MEP-802 and 803 Main generator tip.

    I am working with a company to design a exhaust hood with flap for my MEP-802,3,4, and 5A's that I have. We are also adding two slide in filter screens for the intakes. Prevent those dirt daubers from screwing things up! They love to get into anything electrical. I did my fuse mods above...
  13. Hard Head

    MEP-802 and 803 Main generator tip.

    This is also done for other generator models IN LINE FUSE ADDITION TO TACTICAL QUIET GENERATOR,MODELS MEP-805A, 806A, 815A AND 816A http://www.marcorsyscom.marines.mil/Portals/105/pdmeps/docs/SAFETY/SAFETYMEP-MI-2003-6115-25-28.pdf
  14. Hard Head

    M939A2 Adjustable return fuel check valve.

    Had the same issue out of the blue with my 923A2. Mine was a slightly different issue as the elbow had cracked on the IP. I had to reverse drill it out as it broke off when I removed the fuel line. I decided to follow the info on this thread and change out the original fuel / water filter with...
  15. Hard Head

    Receiver Hitch for bobbed Deuce.

    Here is how the pieces went together
  16. Hard Head

    GL auction shipping company??

    Many of the LTL trucking lines have dropped GL in Ohio. Too much headache and the loads are not prepared or labeled. I have used uShip.com and I get better prices direct from YRC now if your items are in good shape for shipping from GL. If you are unsure it is best to find someone to pick up...
  17. Hard Head

    Recovery from Camp Lejeune, NC. and Bragg next week

    If anyone needs something picked up at Camp Lejeune, NC. or Bragg next week you may want to contact Joe. The Camp only has pickups on Mondays at 9 am and you will need an escort if you are not Military. Good luck on LTL out of there. He is picking up 3 generators for me on the 26th. He is a...
  18. Hard Head

    24v LED headlights

    Have you guys tried the Grote LED headlights (12 or 24V) that go on jeeps?
  19. Hard Head

    Recovery from Camp Lejeune, NC. and Bragg next week

    Hi Guys! just to give some feedback on Joe at SilverWings Transport. He did a fantastic job. Showed up early, worked late, took great care of my gen sets. He is located at Ft. Bragg so he is available and very easy to work with. 704-320-6833
  20. Hard Head

    Recovery from creekside and groveport Ohio this week

    Anyone picking up in Ohio this week heading toward GA, SC or NC with some room?.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks