Search results

I agree. Try new welding cables just to make sure it's not as easy as that. 2nd place would be the rheostats that control the voltage output. Maybe they are warn or corroded. I just thought about it... try a voltage meter at the pos and neg terminals.

Well I ordered the auto tank drain valve the other day. I installed it Friday. I ended up tapping into the DRY discharge air line to feed the auto drain valve by using a T fitting. I rand the output in 1/4" black tubing to the 1/4" port on the air dryer. The port controls the dumping of...

We replaced 2 steering wheels on both M923 trucks and did not have that problem. It was harder to remove the steering wheel then it was to install it. Neither truck had any resistance to raising the steering column so I could install the nut to secure the steering wheel. All that was...

These are 16" not 16.5" one piece rims.

Could not confirm your suggestions. M200 trailers I found use 20" and 22.5" rims. Yes some had a 6 lug pattern. However my rims are 16" 6 lug 1 piece rims. M1101, M1102 and open chassis use 8 lug wheels.

I just looked up the M200A1. The rims are 6 hole but are 10R22.5 14PR Tires, not 9.00-16s

Here are some pictures of the mounted tires.

What model trailers take a Super-Lug 9.00-16 tires on 16" 6 hole rims? I know the M116 and M101 trailers can take the tires but not the rim.

That gives me an idea. Run a electric auto drain valve to the 1/4" port. It cycles every x minutes and stays on y seconds in order to drain water from the bottom of the air tank. I would tie that into a airline and it would force the air dryer to discharge through the drain port for y seconds.

I am trying to use a Meritor Wabco System Saver™ 1200 Plus Air Dryer to produce dry air with my shop air compressor. I am having trouble with leaking air out of the bottom discharge during compressor building up pressure. I tried to get tech support from the manufacturer but was not helpful...

With DC welding some applications require positive ground and negative for the rod. Others are the opposite. If you look up the rod numbers it will tell you wich rods need what polarity DC or just AC current.

Do you remember 7018 rod? Google search said 6010, 6011, and 7018

I love how they say 10 business days to pick up once EUC approved. What id location is only open 3 days a week? Definition of business days: A business day is considered every official working day of the week. So if GOV is only open for 3 days a week then you basically have 3 weeks to pick up...

Yep you got to support it from the frame. That is how all the tool boxes and fuel tanks are supported.

They are underbed tool boxes. Heavy duty! 36" long x 12" deep x 14" high. Locks do not have keys. They can easily be replaced....

Here are some pictures of the tool boxes I just acquired. PM me if interested. $90 each. Most were manufactured in 2011.

75ft of 1/2" cable

nopics

I have some axles off a AF trailer. Looks like a 16 foot semi trailer but with front steer axle. It takes dually 8 lug wheels on each side. The tires are on 16.5" rims Load range D. 1800lb capacity each. So I am guessing the axles are 6000 pound each. I am selling both axles for $100 each...

I have a couple of dozen seats. They fold like movie theater seats. (The bottom folds up and the back is stationary) There are 2 styles of seat belts for these seats.