Search results

So for the drive shafts, I’m using the 2wd/4wd transfer case that came with the engine and 8 speed. I had driveshafts made and the guy really seemed to know what he was talking about and care about the project. I told him what I wanted and when I came back to pick it up it was all different...

I bought several elbows and three pieces of 2.5” and 3.5” pipe. I didn’t use a single inch of the straight sections of pipe

So I wanted to make the exhaust as quiet as possible so over the last year I called Borla six times. Their stuff seems to be best and every single time they said no matter who I talked to size matters. The bigger the quieter. No matter what their sound description says or their sound...

So for the fuel system I heard different things from different people but I didn’t want to take any chances with anything that wasn’t sufficient so I used Aeromotive Phantom 340 Apex 450 with regulator and filter. After it was all said and done the fuel system listed above plus the tank and...

I do at home. I'll check after work. i noticed last night it was shorter than I thought it would be. The tank is 14" deep and it was approximately 13"

Thank you RWH

I've looked in the TM's but I cant find out if the HMMWV is equipped with a rollover valve or not. Does anyone know and if so which part is it? The white plastic thing is shown as a vent.

I have not but those appear to be Speedhut gauges. They have options just for Hummer Humvee. Check out their site.

The other gauges I had weren’t compatible with the motor so I returned them and got speedhut gauges. Before I took apart the dash I sat in the correct seat and traced where the steering wheel was on the dash so today I’m laying out the locations and drilling the holes. Getting ready to prep...

The geared hubs, wow, what a bucket of fun that was. I’ll try to remember all the things I hoped to pass along. There’s almost no information on the interweb about how to break them all down. I tried several methods to get the spindle bearings off and it boiled down to cut it off with a...

Thanks! I will

I tore a boot on a brand new ball joint and I'd like to replace just the boot. I've seen Energy suspension makes them but I can't tell if it fits the heavy duty A2 ball joints or not. Does anyone know or know of another company that makes a A2 ball joint boot? Thank you

The nut threads down onto the spindle all the way except for one thread from reaching the tab washer. I have not forced it on. I have inspected the thread with a magnifying glass and there’s no visible damage down there. I was going to buy a thread die and run over it but no one knows the...

Yeah, I plan on doing that. Thank you

Thanks! I'll sign up over there

There’s A LOT of talk about spindle nuts variations but no where does anyone I can find mention on their product or in the manuals about the thread size and pitch. I need to buy a die and chase my threads. Does anyone know the thread pitch size for the spindle