Search results

You have to remove the heater box, this mean coolant, why do you want to remove it?

So you want an ex-military vehicle sitting in the desert for 11yrs to be perfect? all tires need immediate replacement windshields? At least you have them… brake light on? No or low brake fluid or pressure , wire disconnected at pro valve. 99% of every truck from auction has Tcase engaged…no...

Fast flashing from EESS means the EESS does not see the TSU, unplugging it and plugging back in usually fixes it.

They all are just fine…ive been using Fram PH5’s for 20yrs, recently in the last 2yrs or so, switched to AC Delco PF1218, I buy them in cases of 10 or more for the shop. US military uses same filter.

A2 Pittman and idler require an A2 center link

And when I had them for sale at that price, customers still whined like crazy…sold my last one a few weeks ago at $3500, and even than, I didn’t want to sell it…it was what I was offered From the customer.

I was in talks with the OEM Mfg to make more of these, they are out of production, but if I ordered about 100 at $2200 ea, they would retool back up….not.

That only installed on TOW missle trucks…prevents melting the hatch seal due to rocket back blast

no, I’m saying maybe Attempt to install them first…but yes, there are left and rights of the side rails. im just point out “as I did in my first post” even the OEM kits often require some fudging.

so as I understand it, you have not attempted to install this kit on a truck but your convinced it’s not going to fit? you have never had an OEM kit nor installed one to compare it with the kit your bought from SECO? just trying to understand the logic…

For those who have never installed an OEM top….your going to find fitment varies from truck to truck even with OEM top kits, so unless you have attempted to fit your aftermarket hardware, I would not pass judgement so quickly. ots not uncommon to have to cut or grind a bit to get this garbage to...

melton is a Govt rebuilder of Diesel engines…just Google them. I just received in 2 rebuilds direct from them.

that’s a recipe for disaster…the fuel drain back line is is dumping directly into all your wet components instead of returning to the fuel tank. Cant say I’ve ever seen that in 30yrs.

that ended up being a bad Cadillac valve solenoid..the reason it eluded me was because I originally replaced it during TS and it didn’t fix the issue….I generally only replace the solenoid and not the entire unit. once I had a buyer of the truck, I had to fix it.

If Your temp is always low, your thermostat is stuck open…

i have many sets for these brackets….PM if interested

All newer trucks from the factory have a separate vent hose from the fuel pump to the fuel filler neck. This prevents fuel contamination into other wet components when the diaphragm fails in the pump.

The RF is this rims bead lock…I don’t suggest airing down.

A2 on up to ECV, than REV came out with wilwood brakes. Either way…drivers side HS has to come off. I do a brake job every couple of weeks on these trucks.

you do for an A2 on the drivers side…the one your posting about. from the pic, you removed the radiator stack..