Search results

BTW…… this is another reason SS is such an awesome community! Sent from my iPhone using Tapatalk

@fuzzytoaster came to the rescue again! Thanks everyone for giving me contacts! Sent from my iPhone using Tapatalk

I just texted him. Also reached out to @fuzzytoaster Sent from my iPhone using Tapatalk

Anyone have a spare mount? I guess you have to have you skid plate on to pull your cab back down. My mount bent and snapped. Sent from my iPhone using Tapatalk

Does anyone have these bolts installed? My truck came without, and I could see a need but also it seams that it may be better without to isolate the intercooler from the engine vibrations. In the holes are blue plastic plugs and they appear to have been maybe cat painted in.

Well. I moved forward and spun the clutch. It did start off feeling “dry” but then after a few turns it smoothed out. Sent from my iPhone using Tapatalk

Any one have concerns with removing the cover of the clutch to manually spin it to help lubricate the compressor before I turn this on? Sent from my iPhone using Tapatalk

Ok, quick question…… I asked the place I got my hoses from if I needed to do anything since my compressor was a 2016 NOS. He suggested removing this cover, and manually rotating the compressor clutch center some to lubricate the seals. Anyone else have any thoughts/concerns? They used...

Routed new coolant line. Old one was too short once compressor was installed. Added p-clamps as mine were missing.

Routing of lines past radiator/intercooler.

Updated pictures: Here is the filter bracket….. I planned to mount it on the other side of the bumper plate, but I made it too deep. I will have to dress it up or re weld it another day. Just need it functional. I have it under vacuum. So far it is holding. The hoses...

Can someone post it to the manuals/TM section? Sent from my iPhone using Tapatalk

Thanks! Does the return line pop up from there over or under the hinge pipe? I have the high side in that spot already. Sent from my iPhone using Tapatalk

Ok, my compressor was a new old compressor (2016). I drained the oil and planned to refill it. It started with 300cc oil. How much is everyone running? I have the full Waterloo kit. How much Freon? I heard 60oz (3.75lbs)? Sent from my iPhone using Tapatalk

I got a 1/2 x 56 3/8 (I think) and got that on and tensioned. The upper bracket I have was a bit tight on the compressor for one bolt. I could not have tilted the compressor if I wanted to. I had to start all bolts with the compressor all the way at the bolt heads, then tighten them down. I...

Wow….. I usually have better problem solving….. that never crossed my mind. Heat and lack of sleep must be getting to me. That is my new plan. Sent from my iPhone using Tapatalk

Just mocking up the hoses. Other pictures coming. Anyone see any issues? I am crimping tomorrow.

So, 1/2 x 55 v belt is too short for me. I heard that was the correct size, but there is no chance I can get it over both sides. I think I need another inch or two. Sent from my iPhone using Tapatalk

How about this? Pysrych 304 Stainless Steel Sanitary Hose Barb Fitting 1" Barbed x 1" Barbed 90 Degree Elbow https://a.co/d/5e4FMD4 Sent from my iPhone using Tapatalk