Search results

Chris, I have to ask what kind of gear oil did you have in this?

M1075, What wheels are you using to run these super single tires? Do they fit without any clearance problems? Thanks

I drive and work with and work on my MV's all the time. They really make good farm trucks!

Welcome from Western OK!

I have a Camel brand grease "wand". I have had it for approx. 35 years. It is about 6 inches long. It is round with a zerk fitting on one end. The other end is flattened out to about an inch wide but thin enough and curved to fit into the bearing itself. You just insert into bearing and fill...

Welcome from western OK!! Glad you joined the BEST!!

On some civilian pickups of this era some appeared to not have an ACC position. The key would simply not turn backwards. There was a small casting burr in the column housing for the key cylinder. With the cylinder removed you could remove the burr cleanly and then reinstall the cylinder and then...

I have had these symptoms on my gen 1 light for a while on my M1031. The other day when it was snowing I was running the wipers at full speed and the defroster on high as well. Then there was a definite burned smell and the gen 1 light stayed on all the time. I checked for voltage on wires to...

Discount Tire Direct on the bay has Cooper Discoverer ST 255/85R16 set of 4 $864 w/free shipping. For a limited time they have a coupon good for $100 off at checkout. Check it out!

Welcome from Western OK!

Welcome from Western Oklahoma!

In OK we just wait till a warm day and use a car wash for a project like this! Then it can shoot you in the face because of the high pressure. I would recommend soaking your feet in some hot Epsom salts because of the nasty metal shards and crud. Happy drilling!

Instead of ever using ether put a little gasoline on a grease rag. Take the breather cover off and lay the rag on the outside of the air filter and put the cover back on. Now try to start after the wait light goes out. The vapor from the gas on the rag is just enough to help start the engine...

One of your problems could be the battery terminal in picture #2. These are notorious for bad connections. I would only use one of these in an emergency and then put the correct cable on as soon as I could. It looks like yours has been arcing from cable to clamp area. It complicates the problem...

I would only buy 100% gas for long term storage. It should cost about 20 cents more a gallon but it's worth it. E10 has a shelf life of about 90 days after it's blended before it starts to separate. I do not recommend putting E10 in anything that sets any amount of time. Be good to your engines!

I will have a new one of these at the end of next week. It won't be quick help but it is a new pump if it will help you.

Undetermined distance on the wrench and the injector throws. Neither one have landed yet! I am sorry this has all happened to such a helpful guy.

Wanna trade a wild hog hunt for a moose hunt sometime??? LOL

PM me on these vacuum regulator valves. I might be able to help!

Is anyone available to do previews at Clarksville, TN? Any and all help appreciated!