• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. G

    M936 PTO problem

    With the truck off, open the right rear air hookup and drain air pressure off. then you should be able to shift the transfer case. the rear pto on the left rear of the seat try with the transfer case in netural put the trans in drive and put your foot on the break like you are stopping then it...
  2. G

    Gadsden Fund A Film Fest 2014

    a m134 will be there :twisted: on display
  3. G

    Gadsden Alabama First Friday

    What are the times?
  4. G

    A3 Front tire balance W/ Erik's lug nut fix

    What about if I take the ctis off the wheel, how much counter weight should I need? Nuts, big weight? I know with no counter weight and 1 extra lug it aint balanced
  5. G

    info on selr 00053

    Are these rare? electric repair shops on semi trailers?
  6. G

    info on selr 00053

    A friend asked me to come by and look at something green so I did, he has a selr shelter that no longer has the trailer, I have not seen any of these around. Is there any demand for them? Pricing? Wish it was about 12' and I would put it in my deuce :twisted: but its 20ft long. It has the...
  7. G

    startup issue?

    I will get a elec pump to replace this one, it told on its self today I went to check something and the pump wouldn't come on, a small bump to the pump it came on, its not a big deal to replace, thanks for all the help
  8. G

    startup issue?

    I thought it may have been air left in the secondary filters where the elec pump did not fill it up all the way, I went thru ALL the fuel lines and snugged them up.
  9. G

    startup issue?

    Ok I had a chance to pull the pump, the screen was 90% clean, the rubber line and clamps were questionable. I replaced the rubber line and clean the screen so it was 100% clean. Reinstalled and opened the bleed screw on secondary filters, after 1.5-2 mins I got fuel, it wasn't squirting out but...
  10. G

    startup issue?

    Yes I have flow to the primary its a spin located on the right frame chanel, before the line goes up to the injector pump and secondary filters, it's not a spray more like a gravity drain. The fuel pump came apart? I waited probably close to 4-5 min when I tried to bleed it at the secondaries...
  11. G

    startup issue?

    I opened the bleeder on the secondary fuel filters and waited and waited so I closed it and waited and opened it to see if I heard air, with the buzzer going off I did not hear a hiss or anything and waited, how long should it take to get fuel to them? with the truck eventually starting it...
  12. G

    startup issue?

    I will check it out tomorrow
  13. G

    startup issue?

    My multi fuel deuce has been working and running fine until.....I went to start it and usually fires right up everytime, it was slugglish, it turned over and over then eventually fired off, I drove/worked it as planned and when shut it off for me a break went back a hour later and still the same...
  14. G

    M35a2-3 Fuel Pump, Deal or no deal..?

    Thanks for the follow up info, hopefully I won't be broke when I get back from Knob Creek and I can get one on order.
  15. G

    M35a2-3 Fuel Pump, Deal or no deal..?

    Well how is the pump holding up? Mine is getting weak on my deuce and need to think about getting one before I get stranded. Thanks
  16. G

    2013 Georgia SS Rally T-Shirt Thread

    1 tan short sleeve XL for me.
  17. G

    cargo cover for the m35a2??

    The M35a2 is a 12' bed. The 5ton is a 14' bed. hope that helps
  18. G

    m936 hyd filter question

    Thanks thats what i wanted to know. i didnt want to make a 100gal mess.
  19. G

    m936 hyd filter question

    My hyd filter needs to be changed on my 936 i looked for a tech manual and may have overlooked it but did not find it so, when i take the flange off to change the filter will i loose all the hyd oil outof the tank? I dont want a oil treatment....thanks for the help
  20. G

    M35A3 Owners unite

    Thanks I was wondering about it. I will get my air tank and rig up a pressure line to make sure it engages.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks