Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I need to sell a few items that came with a truck I bought from another ss member. I donk know what a fair price is for a nos m35 cab I have. The cab is cammo, some of the paint is flaking off the pirmer but no rust or rot. IT is still bolted to the shipping crate and I have some mounting...
Did you check the valve lash? Make sure the push rods aren't bent, and the rocker arm is not worn. The intake valve may not be seating. Some causes may be week or broken valve springs, bent push rods or carbon build up.
I have hired someone to pick up this shelter from eastern surplus. Anyone needing something from eastern we have some room on the trailer. Contact me if you are close to our route.
Wanted transport from eastern surplus in PA. to western ma. This is the LME model one crate. Myself and a friend are splitting the cost of this tent so I can work on his backhoe, as my shop is two small. I have a way to unload on this end. Would like to get this here as soon as we can. We want...
I do know they came preassembled from the maker with the fuel tank installed. I have searched the auction sites and found one same as mine listed. Nos in box, with the diverter and needed wires. The fuel tank is different than any others I have seen and the mount that holds the heater to...
That's my understanding as well. Oversize is right at over 100 lbs. I am not sure of the fuel tank size, hard to tell from the pics, but perhaps five gallons. None of the TM manuals I have seen so far show this type configuration. I would like to know the original military application, this...
I bought a heater that I am seeking info on. This is a nos diesel fired 60k btu. Model 78385--10560-c24 vehicle compartment heater. What is different is it has a fuel tank mounted on top with a fuel pump and filter built in. This has the control panel with the start and stop and hi low switches...
Also when I run the motor with the pump on it runs fine, but if I shut off the pump the motor stumbles. I know air is entering some place, I suspect its the filters. I do have leaking injector return lines but don't think that matters here. Possible when I bypassed the fdc I have a loose...
The fuel return line to my fuel tank has a section of clear fuel line so I can detect any air bubbles. With the inline pump on and the motor running I don't see air bubbles. When I shut off the pump I can see lots of air in the return fuel line.
I mounted a gear driven fuel pump on top of fuel tank with a rubber fuel line. So the stock pump is totally gone and I am only using the top portion to seal the fuel tank. I am going to remove the filter unit from the block again and buy new rubber gaskets or o rings.
I did take the fuel filter canister mount off the engine. just like in the pic you posted. I cleaned the grove where the gasket seats made Shure no burs or old gaskets etc. I took a spare in tank fuel pump mount and cut off everything from the cover plate. Basically I just used the top cover...
I put a 24 volt inline pump in for now. The truck is running but sucking air from somewhere. I removed the fuel filter canister's with the mount that bolts to the block as one piece. I took it to my shop that has heat and changed the filters and gaskets. I think the rubber gaskets are just old...
Dave you have blocked my bids on ebay. I bought a nos 28volt gasoline powered generator and a m35 cargo cover from eastern surplus. The generator I got was water damaged . I never posted anything negative, so why you blocked my bids is beyond me.
I need a in tank fuel pump asap. I had 3 spare pumps that all took a dump in the cold weather we have. I have looked on auction sites and everything is out of my price range. I am in western ma. and don't have pay pal. I have a credit card or can pay by bank ck. or postal money order.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!