Search results

OK thanks

This link appears to show the outside handle crank I need? It looks like I need another piece to attach to the outside crank?

Hi All, on my 1009 the rear window will not crank the last 1 inch or so. Awhile ago I purchase in the box a brand new interior mechanism from a guy. He said it would work. The problem is the part on the interior mechanism that connects to the exterior crank is different. I purchased a new crank...

OK Thanks I'll check that out.

OK I'll check it out too. Thanks

Hi OK thanks. I'll test with my voltage meter and see what it tells me.

I have a new rear window interior mechanism. It seems to maybe not be standard? I've attach a photo of what mine looks like. I've bought the crank handle from LMC but it doesn't have the correct interior part to crank the rear window mechanism properly. Anyone have any thought on where to get...

Hi All, My 1984 M1009 has a left rear tail light issue. At first the whole left tail light, brake light and turn signal light didn't work. I found the ground wire has rusted off. I fixed that and now have a brake light and turn signal. But the left tail light still didn't work. I thought ok...

Thanks I have some I can replace them with. If I measure right on the glow plug I thought I was getting 24 volts there and that meant they worked? Is that correct?

Hey All, I think my hard start might be a little different? When I try to start in temps even in the 70's it cranks fine but doesn't fire. Bus if I squirt just a tiny bit of ether it fires right away. They starts almost immediately after that. Both batteries and the starter are brand new. I...

Hi how hard was it taking your front bumper off? I'm going to take mine off tomorrow.

Hi can you show me some more pictures of how it's mounted underneath? Thanks

Found out it was the starter. Put in started from my other CUCV started right up like normal. Thanks all

Hi all. Thanks, the battery terminals were all clean. I believe only the positive side on the front battery was hot but did not check the others. I did not get down and check the starter either. I will try the negative to ground and make sure it is clean. Thanks for all your help, and I will...

Thanks. I've looked at the helpful threads on starters but not sure where to check the voltage?

Hi All, A few days ago I went out to start my M1009. It has always cranked and started just fine. It cranked 3 times like normal then it died. I thought I had a battery problem since I hadn't started it in a month. I put my trickle charger on and charged both batteries overnight. Went out to...

Wow, very cool . That's the best setup I've seen. Thanks for the pics. Sent from my SM-G781U using Tapatalk

Darn no-one has any pictures of their winch on there CUCV?

Thanks all. Can I see some pictures on how you mounted them on the front of a CUCV.

Hey All, I'm looking into putting a winch on my M1009. I was wondering what you all thought about the Harbor Freight BADLAND APEX™ 12,000 lb. winch ? I know nothing about winches but this one looks good to me? Thanks for your opinions.