Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Just finished this one, I had been on and off it for a while. It needed a pump and the correct button, I set the injector pressures, the bores looked good so a new head gasket and new head bolts, the compression and oil pressure were good, everything mechanical was good along with it's...
From what I understand, the crank on the 002 has both pistons going up and down together creating a lot of windage/pressure in the crankcase. The 003 always has two moving up and two moving down somewhat balancing out the pressure created by the piston movement. In my 002's pulling the...
I picked up two Engineered Air Systems heaters model H82 HDU-36e from Ft Meade a few months ago but haven't gotten to them yet.
What model are you working on?
steelypip,
I have been following that threat with great interest. Unfortunately I do not have a load bank, I just feed the garage and turn lights/motors on. I just checked my notes on this unit again and it is a #16 button I need as I have a #12 in right now and the pc mark is two hash marks...
Good news on this one. I finally got around to working on it again and with a good pump from Jerry she fired right up. The rpm was still advancing on its own even with the throttle cable pushed in all the way in (same condition even with another pump but not the reason I needed a pump). What...
Here's some close-ups of what I did. If you google homemade injection tester you will find many plans, I cannot remember which ones I used as I used several as a guide. I went with all high pressure fittings from McMaster Carr. I used an injection line as it already had the correct end for...
A while back I won a couple 002's and had to rob several parts from one to get the other one going (which was the plan from the start I imagine).
This one wouldn't run well or respond to throttle inputs so it became the donor. I have decided to start gathering parts and see if this will be a...
Have you had any luck getting that finned adapter off the nozzle cap? I ordered some new nozzle/pintles and wondered if I should bother trying to replace that gasket.
Welcome aboard.
Here is the Wiki, very informative.
http://www.steelsoldiers.com/showthread.php?62648-MEP-002A-and-003A
I bought my filters on Amazon.
Before you start it, make sure it has oil and an oil filter in it, check the fuel filters. Bleed the fuel system. I change filters after I...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!