• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. epitts

    Onan Gaskets

    Sears shows to have them in stock. http://www.searspartsdirect.com/partsdirect/part-number/110-3635/0071/739?pathTaken=directMatch&filterPart=&pop=flush&prst=0&shdPart=
  2. epitts

    Giving the old MEP-003a a real workout today.

    I put a 100gal fuel tank from a Bigrig on the trailier holding my 2A and run right into AUX pickup.
  3. epitts

    MEP701A problem

    Thanks for the help everybody, I knew you would know.
  4. epitts

    MEP701A problem

    It acts like the throttle cable is not there, throttle will increase idle but will not decrease idle. Started it today did not move throttle started at 55hz and as it warmed up ran up to 69 hz at which time I turned it off.
  5. epitts

    MEP701A problem

    bump, No one has any ideas!
  6. epitts

    MEP701A problem

    I am working on a 701 for a friend it runs good and makes power. The problem is the idle will continue to creep up. I set the hz to 60 on startup it will slowly increase up to 69 hz. I replaced the throttle cable but it did not help, made sure all linkage was lose. Seems the throttle has no...
  7. epitts

    04A084 Slick magneto internal timing?

    Got this from a friend You can find Slick overhaul manuals online if you search. Not sure about the 4220 manual, but you can find them on the 4300 series and they work the same. There is a pin that goes from the distributer housing through the hole in the big gear that aligns it with the #1...
  8. epitts

    04A084 Slick magneto internal timing?

    Try this http://splashurl.com/ne6bkzx
  9. epitts

    What have you done to your CUCV today/lately - Part 2

    try TM 9-2320-289-20 page 10-80
  10. epitts

    Strange Clattery Sound from engine at acceleration?

    Try adding lube to your fuel,my 09 was real noisy with ultra low sulfur fuel. I added outboard 2cycle oil to each tank made a big difference. After you check for lose bolts.
  11. epitts

    Tailgate crank clutch fix / upgrade

    Mine just broke this week, what is the OD of the pipe?
  12. epitts

    MEP802A load test ?

    Are the 802/803 units load testing as good as the MEP002/3's test? I put 10kw on my 002 for a short time, it did not like it but it took it and ran better afterwards. How much can the 802/3's take.
  13. epitts

    H-1 heater questions

    I would think that would make it run very rich, also what is fuel pressure.
  14. epitts

    H-1 heater questions

    Try running K-1 fuel and see how it runs.
  15. epitts

    injector pump timing fast question mep003a

    The flywheel has the mark PC stamped on it, it maybe hard to see.
  16. epitts

    injector pump timing fast question mep003a

    TM -34 page 7-38 Lets try this again.
  17. epitts

    So......Am I the only one

    The power would go out if someone would spit out of their car window. Now that I have my 002 hooked up and running good, the power has not even flickered.
  18. epitts

    Heater, space, radiant, large (h-45)

    Heater, space, radiant, large (h-45)
  19. epitts

    Heater, duct type, portable, hdu-36/e, 120,000 btu, model h82/h83

    Heater, duct type, portable, hdu-36/e, 120,000 btu, model h82/h83
  20. epitts

    M1009 trailer wiring harness to standard civilian trailer harness

    Trailer Adapter Attach fine what I have compiled from SS
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks