Search results

Is this what you are looking for? Blazer - Body Side Seal - Right-Classic Parts

I bought a overhaul kit off GL it had the seal kit P/N 30405 which had all needed seals and o-rings. The top cover does use a gasket and is in the kit. But are not known to leak. If it leaks after being put back together the cover is easy to get to. For a kit try here 30405 - Fuel Systems -...

My truck had 82500 miles on it but the pump had been upgraded. It still had the old o-ring's and crumbled when we took them off, they are brown in color. The new o-rings are green in color. I did not turn the pump up, it runs just fine.

Asfor the cover it's like when you turn the pump up.

I had a friend do it for me who works on pumps but after seeing him do it, I think I could have done it my self. If you look at the Manuals you will see how it can be done. Pull the intake and pull the top cover off of pump, you will need to pull the transmission vacuum shift on side. Under it...

Put new o-ring's on the throttle shaft in the pump. Have not put intake back on yet.:beer:

Yes those are what I am talking about. The gaskets I took off were open in this spot. I will leave them blocked off then. Thanks

I have removed the Intake to fix some leaks. The manafold has two small openings that look to go to the CDR hozes. The new gaskets for the intake have these blocked off. One do I need these and two if needed can I just open the closed gasket? Thanks for the help P.S. I did search the forum

Took the intake off today to fix leaking throttle shaft seal. Hope it goes back on as good as it came off.:beer:

Who made the roof rack? Truck looks good!!

Check the Alt fuel fourm here on SS.

From what I have picked up your 35's will rub, 32's seems about as big with out a lift. But as always YMMV:driver:

Mine came from the Army with Prime well PA100's they seem to run quit on the road, my truck shows 81db's at 65 mph.

So then what kind of wheels did you up grade to?

The stock tires are 15 inch if you are looking at 16" have your rims been updated?

The tire that came on my M1009 were Primewell PA100, nice tire. Got my spare at Firestone.

Will you list the specs on your roof rack?

My truck had a dent in the same spot as yours does. I went to Harbor freight, they have a glue on dent puller. Just used a longer piece of angle on, worked like a charm. Cost was around 10.00

Where in Indiana?

Not a CUCV among them, but the Rubicon did a good job!