Search results

So today I pulled my transfer case to replace all the input/output seals because they were leaking pretty bad. I pulled off the input shaft seal retainer and noticed that the seal that's in there is different than the replacement I have from eriks, NSN 5330001438666. It seems to have 3 lips and...

Dang wish I had seen this earlier, already planned stuff for that weekend. Maybe the spring rally and the truck will get a little dirty instead of the driveway queen its become.

I'd be good for one HH and a set of nozzles. I've learned that with this truck having backups of pretty much everything is necessary haha

I just used a decently thick flathead screw driver to take them off and put them back on. Put the spring hook on the shaft, put the tip in the hole where the hook is supposed to sit, and push out with the handle of the screw driver so the spring hook slides down and into the hole. Took me a...

I got the same lights, they are very nice. One night trip with the stock sealed beams was enough for me.

off my 68

Camper conversions are really neat, not that I have room for another MV haha...

Anyone think about using a pre-cleaner instead of a snorkel, like the Donaldson TopSpin? I don't have any experience using them but from what I've read they seem interesting.

Got some new rubber, now just need the wheels.

When I bought my deuce it had already had the electric wipers installed. I was using them one day in slight rain and there was a pop and something fell to the floor. After further investigation it looks like the threaded section for the nut sheared off. I haven't tried to take the motor apart...

Brakes, bearings, and axle vents. Its a bit more work than I expected, but fun none the less. Also DOT5 is really expensive haha

Do you think the -013's would fit a little loose since their ID is .426" and the maximum ID for the seal the nsn describes is .380"? Sorry if these are stupid questions, this stuff is still new to me.

Yeah I found that NSN also through searching on the web but the one in the TM was 2910-00-292-1464, I wasn't sure if the first 4 numbers made a difference or not so I thought I would ask before I bought the wrong thing. Couldn't find those exact sizes in the McMaster catalog but they have some...

Hello all. I picked up a 68 M35A2 a couple weeks ago and have slowly been going through the issues I have found with it and working the kinks out, these forums have been VERY helpful. This is my first vehicle of this kind but I like to think of myself as pretty mechanically inclined and love...