Search results

Anybody ever build a roof rack for their Frankencab? I'm thinking about building one. Ideas?

Where would be the best place to tap into the air system for an auxiliary air source to run tools, inflate tires, etc? Sent from my iPhone using Tapatalk

When underway my M925A2 makes, for a lack of better description, a rattling noise that sounds like it's coming through the firewall directly behind the engine. Sounds similar to the rattling sound the accelerator pedal sometimes makes at idle when you take your foot off of it. Any ideas...

Buzzer always works, light works when it feels like it.

I've searched the forum with not much luck and I'm sure this has been discussed ad nauseum. I understand the fuel economy is never going to be good in a 5 ton. What spring / governor combination will give the best results in fuel economy? Will advancing the timing help? Straight pipe? I checked...

Where is the best place to tap into for a high amp 24v feed for multiple LED light bars, cab light, 24 to 12v converter, and large LED backup lights which will be controlled via dash mounted toggle? Thank you, Russ

There is an "extra" wire coming from the harness that goes to the right rear tail light assembly on my M925A2. What's it for? It terminates close to the light assembly with a female connector. Thanks, Russ

Is there any way to remove minor surface scratches for the carc paint? Also, what is the best way to wash these vehicles? Thanks!

I need to have my truck appraised. I used a business line of credit to purchase it and now I'm having trouble getting a vehicle loan because none of the banks / credit unions here know how to get a number on it. Thanks!

Is there a document (TM or otherwise) here that someone can link me to regarding exactly how the CTIS system works? I've read there is a speed signal generator attached to the transfer case. Could that perhaps be used to supply a speed signal to a cruise control module? Russ

I've searched. I've looked. Is there a board vendor that sells a filter set for the A2 series trucks here?

My truck has started intermittently shutting off immediately after starting it. I can restart it and it runs fine.

Drove the Beast through the woods to the coast this evening. Gorgeous ride.

What is the best way to restrain the door to keep it from hitting the mirror when opening?

Radio Nerds link is broken.

I just wanted to extend my sincere thanks to everyone here who has taken the time to respond to my posts. I'm pretty far down in the learning curve and I know some of what I ask is often duplicative and I know the board heros get tired of answering the same old questions. I'll try and do my due...

My M925A2 ROPS cab leaks like a sieve over the windshield when driving in the rain. I notice two different seals up there. one where the entire windshield assembly folds down and one above that. Would it hurt anything to remove them and use black silicon to seal the openings? I have no plans to...

I need to buy an oil pan gasket for my M925A2. Searched the forum didn't find any info. Any suggestions on a dealer? Thanks!

Is there a way to balance the tires on a 5 ton? If not, will removing the CTIS stuff help?