Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Has anyone converted a M1061 to dropside
I was thinking about this last night.
The bed is 14 feet long and 8 feet wide.
How long and wide is the 5 ton bed?
The duece bed is only 12 feet long so the sides would be a little short.
M35A3 production numbers
I am looking for information on how many M35A3's were produced each year or by the initial contract and each extension.
I did a search and was able to find this tread that indicates the numbers are very low...
I have located a source for used 90 degree angle connectors that will plug into the this generator. I have also located a source for the panel mounted connectors.
Does anyone else need these connectors to build the cable and control panel without modifying the unit?
Are electric brake controllers proportional?
There was a post a couple of days ago about using a relay tied to the brake light switch to control the electric brakes.
Is it necessary to use a proportional controller or is the relay ok?
Is there any issues with the brakes being on or off?
I am building an enclosure for my Mep 903.
This unit is a little loud with out an enclosure due to the kobuta running at 3600 rpm.
The unit is going to be mounted to the frame of my truck.
The wood decked bed will make of the roof of the enclosure.
The truck frame and bed sub frame will...
Does any one sell a NOS distributer cap for this or have a source for good aftermarket caps?
The chinese caps are junk and most have a bad terminal in them
Does any one sell a NOS distributer cap for this or have a source for good aftermarket caps?
The chinese caps are junk and most have a bad terminal in them
I am very shocked and dissapointed to find that you have to make 100 posts before you can post a classified add.
This seems utterly stupid
the wife says one of the trailers has to go and I was going to see if anyone wanted it or the parts but I gues that it will just go to the scrap metal...