Search results

I took one apart ,absolutely brand new inside and out All the wheel valves are manufactured 03/2016 so only three years old.

I have brand new wheels valves still inside the box. https://www.steelsoldiers.com/showthread.php?185265-Wheel-rim-valve-ctis-lmtv-fmtv-mrap-truck

When I disconnect my CTIS Controller the abs light go’s out. Switched to another CTIS controller and abs light stays off.

I tried it today but unfortunately it didn't work.

On my 2008 M1081A1 with Cat C7 the intermittent function isn't working. If I put the lever in the intermittent position I get the same speed as in the low ( I ) position. Does anybody know where the Wiper Relay Ecu is on a A1 truck

One of my rear brake chambers is leaking air, could that trigger the abs light? I did a brake test but even with the abs light on it still works.

Hello I have a 2001 M1078A1 where the abs light stays on. Does anyone know how to troubleshoot the abs or read the abs codes ?

I have a Fahrzeugbrief for my LMTV , you just have to know the right people.

I can register them in The Netherlands & Germany no problem.

This is my 2008 M1081A1 with Cat C7

Yes I have.

Can someone tell me the location is of the Out Put Speed senor. The connector is on transfer case. On the opposite site of the connector ( rear side of the transfer case ) there is a access hatch. I have the feeling the sensor should be there.

I'm working on buttons mounted on the steering wheel. I found a good solution that can easily be mounted on the steering wheel. The steering wheel buttons send the inputs wireless to a receiver. The receiver sends the commands to the ECM. ( Same as a swich would do it ). I'm working on a module...

Thanks for the posting , I will be adding Cruise Control to My C7 & 3126 also.

I have airlines from the Oshkosh kit

So this the plan , Tom is going to tow the M1078 with his M35. Together I’m confident we get it running in no time. It’s going to be a nice adventure :-P

I think the truck isn't running because it's missing batteries and the starter. My plan is to take those and try to get it running on the base. Last time when I bought my M1081A1 the Gov Planet inspector was very helpful. We took off the starter together and drove to a starter/alternator repair...