Search results

Howdy folks. Happy 4th of July to all. Im having issues with my glow plug system. The controller has the leds staying on after ignition is off with keys out. This drains my battery. Also, when i connect the positive pole it immediately arcs and starts cycling the glow plug relay unit ot warms...

Howdy folks. Im thinking of towing a few hmmwv with an m1078a1 and tow bar. The manual says the pintle can handle 12k lbs and the humvee is under 6500 lbs. Is the tow bar all thats needed? Im really a newbie when it comes to towing so any suggestions help. Just to clarify, this is just an...

Howdy gang. Looking for a good mechanic to send an m1008 thats been sitting for a while. Georgia or Fl area. Thanks

Howdy gang! Got an issue with an mep 007b. The gasket that holds the muffler in place and stops it from rattling is gone. I found the gasket (71-4396) in the manual but its no where to be found online. Anyone have an idea on how to keep it centered?

Howdy. Just installed by freshly rebuilt pump but the she is running a bit high on rpm. I can manually put the finger on the throttle lever and she will go down to the correct idle speed. I ruled out the pump weights since she spring back into position. I oiled my throttle cable and the...

Howdy. Just noticed my vacuum lines and they are flat as if the negative pressure is collapsing them. Could it be a bad pump or bad hoses. Those hoses were there when I got my m1008 but im gonna swap them just in case. Any suggestions on what hoses to use?

Howdy folks. This is just a joke since I saw one of those old electric car turbo ads and got some inspiration. I must report that there were no noticeable performance improvements. Hope you all enjoy your memorial day weekend. 🍻

Howdy. Im working on an mep 803a thats dropping loads for no reason. Im loadbanking it to 10kw amd it runs with no issued for about 8 mins and then drops the load. The idiot lights work but none turn on when the loads drop. Btw, the percent rated current is displaying 133% at 10kw but that may...

Looking to transport this from Lysle Tx to Madison Ga. Anybody have space?

Alright guys. I just took out the lift pump off a unit that even had the tappet stuck. That said, the issue is the pump fell apart when i took it out. The clamp, spring and piston just fell out. I cant get the piston to stay in and comes right out when i put in the spring and detente. I does not...

Hello Gents. Im having an issue with this breaker in a mep 009b. I have already taken off the contactor close mechanism thats sits on top amd openned the units. The issue is that it will not stay in the closed position even after manually operating it. Any suggestions. reaker

Looks like I just landed the oldest mep 803a. Must have been the sample they sent. 🤣 Yes, it was refurb at letterkeny in 01 and they swapped plates.

Howdy folks. Im in a bit of a bind and need some pics of the wiring to s3 and the breaker contactor. My 007b was messed with and does not work properly.

Howdy boys. Looking to upgrade the oil pan on my m1008. Any ideas.

So this is the first time i have seen this issue and I wonder if any of you have run across the same problem. Got an 804a i just got running and it starts up no issues. The moment i hit the contactor close i sense a small draw in power but nothing is connected. If i then open the contactor i get...

Anyone have the circuit breaker assembly for the mep 007b? Made by Dsquare part# 63030-211-50.

Howdy. Im looking for the alternator and bottom mount for an mep 804a. Let me know if anyone has one.

Howdy. Just picked up this mep 009b and im missing both oil filters.

Howdy folks. Im looking for a fuel filler elbow for the mep 007b. I have included a foto of the item. Thanks

Howdy folks. Need a ride for my Hmmwv from albany to jacksomville. Anyone make that route?