Search results

Just as an FYI to anyone looking to do a surface mount setup like in the first picture, off the truck they look great but once you mount them, you will see the downfall of this method. The factory dash face is angled downward so with the gauges flush mounted like this, you are not looking...

I don't know about Ford but it looks that if Dodge made a version of a CUCV. It looks like the main box is the same as a M1010 but they have the front part which I assume made it more aerodynamic.

Yeah, I have read many reports about K&N filters and for street driven vehicle, I might buy another one (this is coming from someone who has them on my hot rod trucks and used them for years) but for anything that goes off pavement, never again. They do not filter enough of the fine dust. I have...

Great, you at least found a major problem so hopefully fixing that, all will be good. As for rebuilding, I don't know but I do remember when I was searching, I could buy just the vacuum can pod part and not the whole assembly. Seemed to cut the price down about $100 over a whole assembly...

Actually I have a question, you changed over to a gear reduction starter. Did they make those in 24 volt version? Are you sure you got the right voltage? I don't recall when I was looking for replacement GR starters online, finding a 24 volt version (not that I needed one as I was going to 12...

Man that thing came out major sweet!!! I so need to get up and see this really soon!

Problem with that is the vacuum pump is pulling about 20" of vacuum and the modulator should only be seeing about 8". It is very possible you could have damaged the modulator going direct. Also, the vacuum switch regulates a variable signal to the modulator. Directly from the pump, there is no...

When I did my DD starter to GR starter (and moved to 12v), I had to trim off the tab on the red wire that connects to the starter. It is in the wrong location and would be very close to the soleniod before I even got it tightened down. My guess is this tab is hitting the soleniod power and...

I agree with Warthog, if you don't have a vacuum gauge to verify what you are getting at the trans modulator, you will be chasing your tail. Test gauges are cheap, buy one and check. Mine was a combo of bad vacuum lines and modulator. After replacing the lines and it not working, I checked...

Hi and welcome to the M1010 club! :beer: Interesting problem. I am wondering if something is bleeding power back into the system via the DUVAC or TWINPUT. There could be a capacitor that is staying energized until it bleeds off its charge and then shuts down the power. There is a wire that...

:lost: :?::?::?::?:

No idea what you paid but on Summit's site they are $239.99 for Warn Premiums. If you are getting those for less then $90, I want to know as I am going to start a new business. :p About the cheapest I can find is $195. Are you sure you are talking hubs for a DANA 60 axle. M1009's don't use...

Hey guys, Just wanted to give everyone a heads up that Summit Racing has Mile Marker Surpreme hubs on a killer special. Normally $165.95, on sale $89.50. This is for a DANA 60 axle. I just happened across them and looks like a great deal if you are thinking of replacing the stock one. Just...

x100 on that! rofl

Since I am planning to do the same removal (but both benches), I would love to know this info too. Anyone?

Opps, I was talking about the transfer shift bezal, since I referenced that needing a light. I'll look for those screws again. Must have missed them the first time. Mine is broken off on the upper pass. side corner so I'll be hitting the junk yards.

Thanks!!! You just saved me a bunch of time and hassle. I was thinking the light was burnt out and the two wires were for the light, not the transfer case switch. Guess I'll add a light. BTW, how did you get the bezal off? I can't seem to figure out how it's attached.

Man, what is all of that white stuff you all have! Crazy I tell ya!!! :cookoo: :razz:

Are you checking the fluid after it's hot? Let the engine warm up is not warming up the trans. My Cherokee has a trans temp gauge and it take a good 20-30 mintues of stop and go driving to get it up to temp. If the fluid level is fine at operating temps, then it could be that the passages in...

AMMCO = Bend over and Smile! :p Run as far away as you can from them! Drop the pan, change the filter, fill up with clean, new fluid. Make sure there are not any leaks and dropping the fluid too low or a clogged filter. Well built replacement TH400 can be had all day long for $900-$1400.