• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. dougco1

    86 M1009 Water Pump

    Harmonic damper.
  2. dougco1

    Arrived...........the M1009/BIAB1 from german M1008

    That's one hell of a nice looking dick
  3. dougco1

    M1009 Little Red Riding Hood.

    Rick, are you dressing up as the Jester for the Renaissance Faire again?
  4. dougco1

    Last (and only) cold start advance/high idle post/question

    Rockauto has them for about $70. https://www.rockauto.com/en/parts/acdelco,10154649,cold+advance+solenoid+connector,1000346
  5. dougco1

    14066255 throttle solenoid M1009

    I had thought the same thing when mine had issues and logically replaced my temp sensor first. It turned out to be the fast idle solenoid that was bad and had a mind of its own. It would work fine one day but the next day it would race the engine to about 3/4 throttle. Just the same as the OP...
  6. dougco1

    14066255 throttle solenoid M1009

    http://www.2040-parts.com/nos-ac-delco-14066255-solenoid-new-nos-gm-fuel-injection-idle-speed-control-i2329042/
  7. dougco1

    14066255 throttle solenoid M1009

    Its called the Fast Idle Solenoid. No longer manufactured but still out there on eBay from time to time "$70.00+". It sets the idle up high when the engine is cold. Its activated by a temperature sensor in the top of the block by the firewall. Just keep it unplugged in till you find a new one...
  8. dougco1

    Gen1 Light stays on and oil light with engine OFF. Any ideas?

    Time for a new or rebuilt alternator. I had the same thing happen to me last summer. Just keep the batteries disconnected till you repair/replace it
  9. dougco1

    2 CUCV blazers, one purrs one rattle monster, ideas?

    I'm not sure if my balancer replacement gave me more power but when I washed it, the truck did go faster.
  10. dougco1

    CUCVRUS Repair Projects

    That's why they call this region "The Rust Belt"
  11. dougco1

    My DIY tow bar

    I think a pair of matching heavy triangular plates welded fast to the tow eye "top and bottom" with 2 holes to accept the arm bolt pins will work just fine. That will still allow for the adjustable tow bar width your looking for.
  12. dougco1

    Wiper issues

    Make sure you bypass the radio resisters that the military put in. They are no longer needed, will often fail and cause issues with your wipers. If that's not the case, it sounds as if you got bad remanufactured wiper motors "It happens". You can turn them back in for a replacement under...
  13. dougco1

    Brake issue, ideas welcome

    I should have offered to sell you my M1009
  14. dougco1

    M1009 Little Red Riding Hood.

    Rick, I see your wife was posing for the Renaissance Faire brochure again.
  15. dougco1

    CUCVRUS Repair Projects

    You may have water in the system. Hydraulic fluid doesn't expand or compress but water does when it freezes. My Kubota hydraulic fluid always has water in it when I change it. Look for a hidden drain plug lowest point on the underside.
  16. dougco1

    What have you done to your CUCV today/lately - Part 2

    And I gave away my extra one I had. If I only new.
  17. dougco1

    m1008 drive shaft

    He was last seen on this site on 12/2014. He must of sold them all, took the money and retired to an exotic island.
  18. dougco1

    Wilson Starters for CUCV?

    Yes, the part # matches. Must be a misprint 6.9 in the add.
  19. dougco1

    Wilson Starters for CUCV?

    Save some jingle DELCO 27MT 24 VOLT for 6.9L CHEVROLET STARTER 10497166 REMANUFACTURED | eBay
  20. dougco1

    What are these wires and capacitor?!?!?

    Never new of or heard of a fire hazard from the OEM 24v to 12v resister. Both my trucks are still hooked up stock and I still sleep soundly at knight.
Top