Search results

This may belong in parts wanted area...looking for a S.O.S. of some field wire. Maybe a mile.

I know that there has been some discussion in the past on this and I never really found a solid answer....I have pulled off several brake shoes from both my deuces that are oily and i had several so i just replaced them. I know the common word is to not use them but some have said the oil can be...

If I have the old style horn, will the new style kit be a direct bolt on?

I took my PTO to have it given a thumbs up by the local heavy duty drivetrain place since I had it off. The transmission had bad leaks at the boots/seals and sat for many years like that so inside the pto got really rusty. It still turned what seemed to me just fine but the drivetrain place said...

I just took off my PTO to replace the shaft seals. Got tired of having dead grass spots everywhere from it leaking. First question...Yep you guessed it, it is about shimming it. TM not much good on this as you all know and it really seems that the best bet is to do it by feel. I have gaskets...

I just got the prices for the stripping that goes under the frame to cowling and hardtop to cab....going to make it Intead. In my stupidity I threw all of my take offs away and I need to know the thickness of the material. I am thinking 1/8" but want to be sure. Does anyone have them to...

My r-case drain plug is rounded out. Anyone have any suggestions? I have tried putting a flathead in beside the ratchet to tighten it up but not having any luck.

Is there an app that does a better job than Tapatalk? Pics don't upload correctly for me on Tapatalk. Sent from my SM-G955U using Tapatalk

Truck has all new filters, new HH O rings, FDC bypassed, injectors have been tested. I just cant win with this truck I got taken to the cleaners with....Got it running for the first time in a while (just got my tank back on from having new bottom put in it). Has a surging Idle when cold and...

I just pulled the tank off my "parts" deuce. Full of growth. I have removed pump, etc and now need to get all of that growth out. What is the best course of action? Is there anything I can put in there and let soak that will dissolve it? It is pretty bad. Sent from my SM-G955U using Tapatalk

On the new to me deuce, it had zero brakes and no fluid in MC. I bled all lines correctly with my power bleeder and tested. Either with truck pressured up or off with no pressure I have to push pedal to floor and then second push gives me full pedal. I re bled and same issue. When they work...

Could I get some pics of Sherpa winches mounted? Front only and pics of the mount also. I really appreciate it. Sent from my SM-G955U using Tapatalk

My other deuce has it but my '71 M109 doesn't have the starter relay on the side of the block above the starter. Is the starter solenoid filling that capacity? I did notice that the #10 wire I repaired when troubleshooting no power to main switch is coming from the starter solenoid on this...

Went to look at another deuce (been ignored a long time)...I was checking it out and put two brand new batteries in it to try to get it to turn over. I turned the battery switch and nothing is happening. Now I want to say the switch is bad but I of course did not have a meter with me to ensure...

I have my hard top off for this phase of my never ending resurrection of this M109 that was a very poor purchase...I am looking for an easy button in the refit of the interior of my hard top. I already have the insulation out and I will say that whoever had the job of painting on the glue to...

After breaking three of the bolts holding my mirrors on, made me wonder if anyone has successfully mounted some aftermarket mirrors that have a little less going on than those stock mounting solution. Sent from my SM-G955U using Tapatalk

Probably wrong place for this but I am working on my deuce so here you go. The tank measures 31x26x16. Came with my deuce and I am hoping to make a dual tank setup with it. I can anyone recognize what it was originally for? Anything special about it....different metal or will it eventually...

Will most of the sound powered phones talk to each other?? Will a TA/312 talk to a TA/1? Just need the phone, batteries, and slash wire for a 2 phone system right? J box for multi phone? Sent from my SM-G955U using Tapatalk

I have been told on this forum that Vulkem is probably the go to stuff to lay across an overlap in sheetmetal...the stuff does not seem to be available in the big box stores and is kinda expensive online. Is there a decent alternative i can use that will seal the joint and allow paint to stick...

Where do I post info on a vendor of MV parts to warn other SS members? Kip Sent from my SM-G955U using Tapatalk