• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. rickf

    Why does our M1008 Hop?

    The way you describe it sounds like what I call the death wobble. The front wheels start shaking side to side. That is a symptom of a loose steering component or more likely bad king pin bushings. Check your spring bushings, tie rod ends and make sure the frame has not cracked around the...
  2. rickf

    spots at Aberdeen???

    Tow rig parking at Aberdeen Hi gang, You don't see me here much anymore because I now have a M-151 so I am on the other forums. I have a question, I notice they have changed the layout and there is no parking anywhere that I can see. I can't get any info from The sponsor club. Do any of you...
  3. rickf

    M1009 won't start...did a search but no luck

    RE: M1009 won Mike, I can tell you that you need two fully charged and good condition batteries. If even one is a little off you will not get enough to start. Rick
  4. rickf

    Stretch's used oil centrifuge

    I had seen that done in Mexico about thirty some years ago, I guess it is still feasable today! Everybody wants everything right now, so this is slow, it is damn near free! Rick
  5. rickf

    Homegrown Tow Bar

    I have never been a big fan of Airco machines but any old machine will beat a new one hands down and it looks like you have a good one. I gave away an old, and I mean OLD, Miller barn box about fifteen years ago and have kicked myself ever since! That machine gave me the best welds of any stick...
  6. rickf

    Homegrown Tow Bar

    Very nice work. Being a fabricator and welder myself I was originally going to say something about moisture getting into the laminate and spreading the plates but you have done a very nice job of welding and finishing. That is a LOT of grinding, What type of grinder and media are you useing and...
  7. rickf

    M1008 stalling after 2 or 3 seconds

    Again, check the fuel return line. If it was pinched when the tank was replaced it will shut the truck down. If you have good flow then the lift pump is good You should have no air at all in the bleed from the filter. Put the bleed line in a jar of fuel and watch for air, if you have air then...
  8. rickf

    M1008 stalling after 2 or 3 seconds

    Are you bleeding the filter from the drain on the bottom?? You need to use the air bleed on top of the filter assy. Also check all of your lines leading from the tank to the lift pump for kinks or cracks. Any air leak at all will give you a problem. Also ake sure the fuel return line is clear. Rick
  9. rickf

    Driving restrictions/historical vehicle

    Yes, are they enforced, not usually. Usually it is to and from shows only, no night driving, no four wheeling. If you are not doing something stupid I don't think many cops are going to bother you. Rick
  10. rickf

    Aberdeen 2008

    Every year when I go there are probably 50 spots that are never used down by the highway end. I have seen people set up there on Sat when everyone is leaving. You know they did not pay for those spots. Rick
  11. rickf

    Aberdeen 2008

    I wish I had checked on here sooner. I e-mailed the club that runs it and like last year they did not reply. I checked the web sith ad it said completly sold out with the exception on 2 spots in the yellow section. Rick
  12. rickf

    My butt needs to get to aberdeen...

    Scott, I know there are some 151 guy's coming down from Boston. You might ask on the G838.org or G503.com.. Rick
  13. rickf

    Deuce Wrecker for Sale

    4.17 and climbing in NJ. I stopped driving my Powerstroke and went back to the 85 Honda!
  14. rickf

    Deuce Wrecker for Sale

    It's up to 240.00 a ton in NJ. I just got 350.00 for an 88 ford Ranger! Rick
  15. rickf

    Deuce Wrecker for Sale

    I certianly hope that one of you guys gets it. Rick
  16. rickf

    Deuce Wrecker for Sale

    OUCH! :shock:
  17. rickf

    Glamour shots of the deuce family at North Fork Depot

    Mike, Good looking trucks. Hope to see you at Aberdeen, where will you be? I would go easy on the earth destroyer thing, they have already closed almost every trail in NJ. It can happen elsewhere! I hope to be cruiseing Aberdeen in my mutt. Rick
  18. rickf

    Mississippi recovery gone BAD!

    Let me get this straight, You towed a deuce with another deuce that had bad brakes?! Substandard attaching hardware on the tow bar. all this on the interstate! You guy's are really scary. The main problem is that if you have an accident it looks bad for all MV collectors. If you kill someone...
  19. rickf

    EUC DENIED

    Hello gang, I do not post on here much even though I have been visiting for quite a few years. I have noticed that ever since GL has started advetising on here there seem to be alot of people that instantly jump to their defense in any situation. I have known about this situation with Floyd for...
  20. rickf

    Insurance for a NJ deuce

    Who do you NJ guys use for your insurance? I use Hagerty for my other vehicles but they will not cover a deuce unless it is stored inside of a garage. I can put my garage in a deuce!
Top