Search results

GP resistor. to convert 24v to 12v for the GPs. If its not hooked up to anything then your GP's have been switched to straight 12v. Its not needed for anything.

I used a simple bottle jack to help compress my bilsteins when installing them.

Yay!!!

Got it! I think your idea should work. I have a fire extinguisher in that location.

Do you have the blazer or pick up? blazer mounts are behind the driver seat on the side. two mounts right next to eachother. ETA: http://www.steelsoldiers.com/showthread.php?159391-CUCV-M1008-Rifle-Mounts good pics of mounts here. from pick up ETA 2: For M1009 post #6...

I'm not sure on the size, but it should be Standard measurement. The switch to metric happened in the 90's (?) ETA: the internet says 9/16"

You don't need to move the seat to get it out of the holder. 10 or 20rnd mag works better, doesn't get in the way when you;re getting in and out of the truck. A shot gun fits in there too.

^this. Look over your left shoulder. I assume pickup due to bench seat. its where the hemostat is clamped.

I found the part numbers for all 3 of the bearings for the hub and spindle. TIMKEN SET38 front outer bearing and race. TIMKEN 382A inner race TIMKEN 387AS inner bearing TIMKEN SBK3 spindle bearing and seals. Do you guys think that I need to replace the locking hubs too?

Thanks! Will do that then.

So looking through 34-p fig 96 I can't find the part numbers for the bearings in the hubs. Also what's the torque spec for the spindle nut? Sent from my SAMSUNG-SGH-I747 using Tapatalk

Yep, same as priming an oil filter. I replace my box fuel filter every 10K miles. So, every other oil change.

Just switch your GPs to run straight off of 12V. No need for the resistor.

I use a tiny tach Sent from my SAMSUNG-SGH-I747 using Tapatalk

LA to barstow is at MOST 10 gal for me in my m1008. Including pretrip grocery shopping. Which works out to at least 15mpg. A 26gal blazer with the 3.08 gears should be able to get you from LA to vegas on one tank. But, I do recommend stopping by the "food 4 less? (kroger store)" in barstow to...

Did you every fix your problem? I am also still experiencing death wobble even after replacing the kingpin bushings and springs, with two washers for pre-load. ETA: just found my front driver shock to have internally failed. Will be replacing it and it should fix my problem.

Finally my truck is home from the event!!! I just finished unloading! It was a great event for me! Replacing the starter took a little bit longer to replace because the nut for the support bracket on the starter was stripped, but nothing a small application of a BFH couldn't fix. Now I'm...

I had a great time too even considering that my truck doesn't start. Big thanks to fastnova for towing me; prospector for letting my truck spend a the next couple days in his yard; and true knight for getting me home. The tubing and water balloon fight at the lake was awesome! Sent from my...

My things are packed. All I have to do is load it on my truck. I will not have paintball gear for this trip but I am bringing a case of paint for those that do.

I'm going shopping for food and beverages today! !!!! Sent from my SAMSUNG-SGH-I747 using Tapatalk