Search results

Ive been using it for a few years now without issue, but the last week it’s delaying me fits. I can go through the startup procedure and get it to light off and make heat, but after cycles “off” and isn’t making heat it won’t go back to the heat cycle and ends with the dreaded alarm/safety...

Folks always want stupid money for the things I need, I swear its a curse! :razz:

Does anyone have a line on a working used regulator for an 003?

Thank you, this is just what I was looking for! I needed a solar option for a gen away from the grid.

Any recommendations on a solar alternative for an off-grid location?

Can anyone possible share are picture of the wire connections at TB1 for me on a running unit? I've got two wires disconnected and wrapped in black tape. Thanks.

Jerry received and finished up the injectors on my MEP-003 today. One was popping at 1,000, one at 1,100 and the other two at about 1,500. They've been squared away and will be back in my hands shortly. Thanks again to Jim for bring this to our attention and to Jerry for fast service!

Speddmon, thank you for your reply. While I am new to generators I am not an ignorant and am capable of learning new things. When I get to something I don't know or understand I read and or ask questions. Great news, the cut wires have been repaired and it's making power! The gauges are...

Reading the tech manual, and thanks for the number, I see I need to assemble the exhaust. Not sure if that had anything to do with it tripping breakers once the fan was turned on but I will do that and give it another try. We had it plugged directly into the wall and it tripped our 20 amp...

Thanks FANTASTIC news. Thanks. Would this also prevent my frequency meter from operating?

Just read in the manual about not running the unit for more than 10 minutes with ambient air temps of 70 or more and wanted to make sure you were aware.

I can't get a picture right now but here are a couple TM images that show its location pretty well.

Awesome. thank you! Would that have anything to do with why this unit isn't generating any power?

Have you found the tech manual as a PDF? I got mine out today and it keeps tripping a 20 amp breaker after the fan starts to blow

Is this the diode?

I have a kill-a-watt but they've cut the wires going to the convenience outlet. Will try and fix that and move forward from there

Ok. I don't see any identifying marks on the wires that were cut. I know I'd have a 50% chance of soldering them back in the right spot, but how do i determine which wire goes to which pin? Does it even matter?

How would you switch that electrical connector over to a civilian style plugin?

Can you guys please help me by point me in the right direction? I have searched "throttle" in the tech manuals but am not coming up with the procedure to adjust the throttle to bring up the RPMs. Even when the throttle knob os fully adjusted I am lacking enough speed to get it up to 60htz...

Going over my newly acquired 003 this AM and found the wires on the generate side of that control box cut at the J12 terminal. Looking at the tech manual (TM5-6115-585-24P) it appears to be item 19 in figure 14 on page 52, CONNECTOR,RECEPTACLE,ELECTRICAL EA 1 1 MS3100R10SL3S (96906). Search...