Search results

Probably...I don't recall a plastic fitting in the horn system on an A2, OEM anyway.

Arlyn, Straight out of the Operator's Manual: TM9-2320-272-10 July 31 2012 Revised M939 Operator's Manual Table 9. Automatic Transmission Data. TRANSMISSION Oil Type: OE/HDO 10 -4°F to +55°F (-40°C to +13°C) OE/HDO 15/40 +10°F to +110°F (-12°C to +43°C) OEA -65°F to +40°F (-54°C to +4°C) Oil...

Got a photo?

Best to contact you State DMV to get those questions answered, unless someone in Pennsylvania has done the same thing.

Did you ever get your power steering done? Or the electric fan installed?

Put your request in the "Parts Wanted" Section of the Classifieds, you might find someone there that may have some. I glad you scuffed the PCB to get good contact for your trouble-maker lamp, that was the next place we were going to go with the trouble-shooting. Doghead was being sarcastically...

A thermocouple is a temperature-measuring device consisting of two dissimilar conductors that contact each other at one or more spots. It produces a voltage when the temperature of one of the spots differs from the reference temperature at other parts of the circuit. A thermistor is a type of...

Did you check the lamps?

[thumbzup]

Sweeeet! Keep us updated on your progress with your vendors.

The 0-60 PSI sending unit/gauge would be a little more precise over the 0-120 set up. Sending unit is on the passenger side, back of the block, above the starter. I agree with the others, sounds like a short somewhere. Be sure and download those TMs to become more familiar with your truck.

And no one mentioned downloading the TM. Here is the link for the TM that will allow you to become more familiar with your genset: http://www.steelsoldiers.com/upload/Generators/TM5-6115-585-12.pdf

My 003A has one.

I paid just a tad over $200 or my EGT/Boost set up. I had them install 24 Volt LEDs and copied the black background and white numerals to match the OEM Deuce gauges. I like the idea you don't need a power source for the probe (K style), and with the factory installing the 24 Volt LED, no...

Clinto were you able to use the measurements I provided? Were they accurate enough?

ADU = Air Defense Unit?

I would think most battery maintainers are designed to charge at least (2) batteries in parallel. I know for sure my Battery Minders are. If you are maintaining and not charging, I cannot see where "half the advertised charge" would be a problem.

:ditto:

Go to your local truck stop and buy a gladhand, install a reducer and female quick-disconnect on it. Install male and a quick-disconnect female on a 25' air hose, roll up and store in tool box.

These TM's will increase your familiarity of your trailer and keep you from calling yourself an idiot: http://www.steelsoldiers.com/showthread.php?110815-m105a3-trailer http://www.steelsoldiers.com/showthread.php?99419-M105A2-M103-1990-version