Search results

Somemedic, When using crimped terminals, I most always "tin" the wire first ( solder all the strands together), then crimp the connector on, then solder the wire in the terminal also. Makes a better connection and lessens the chance that the strands of wire will break due to vibration. Try it...

This link may help some. http://www.steelsoldiers.com/electrical/7047-testing-cleaning-repairing-light-multiswitch.html BC

It looks like an M135 wheel well, but it too far back in the bed so I have no clue what it might be. M-135 2 1/2 TON 6X6 DEUCE TRUCK BC

Dave, if my gut instinct is correct, you will do all you can to help him.:grd:. BC

If it were me and my truck and in that situation, I would be on the phone to Dave at Eastern in a heartbeat:x BC

Hey Mike, I'll try my best to make it again. Patch...Start getting your M37 roadworthy now:driver:. Scoot...get your headgasket fixed..need help?...maybe I could bring my Deuce over and we could have a wrenching weekend and get them both in roadtrip condition:driver:. Beaubeau....where are...

This Forum used to be fun.

I'm not trying to be a wise ass here, but if you search you will find hundreds of posts that will answer all your questions. You also will earn a lot about the vehicle you are thinking of buying. BC

Check Fair Radio. If they don't show what you need, contact them. I've bought Bendix connectors from them, both male and female, which is what the little bugger is behind the seat. You may also find just the cable you need. BC https://www.fairradio.com/ After reading Carnacs' post, I have to...

DEUCE-COUPE Check the third post down in this link. They are of how I installed mine. BC http://www.steelsoldiers.com/deuce/27136-need-heater-help-maybe-parts.html

OK, been reading a lot about these heaters and a TM is referenced but I can't find the number. Any help? BC

jcaiii, I believe it to be around 2750 lbs. or so. Heavy trailer. BC

This is all I have right at the moment. I could find out about the control stuff in a day or two. BC

Memphisdoug' Maybe you have already seen this, but here it is anyway. Open in a new window or some application where you can blow it up if you need to. BC

On the front, possibly a winch mount; or, being Forest Service, a place to put a gas powered pump so they could pull up to a water source, hook it up and start pumping. My.02. BC

Slim, Try saving the file to your computer and then opening it, if you haven't already tried that. May work. BV

It seems as though your antenna is working properly. The clicking is it changing the frequency setting to correspond to the frequency you are setting on the radio to transmit and/or receive on. Look at the pointer and remember where it is set and then change frequency on the radio until it...

Hey TexR, In my on-board parts dept. in the Deuce, I found the following. NAPA #1242 0735 Copper Gasket On another box: 11596 0738 (10) Bleeder screw If you are into the brakes anyway, good time to replace the bleeder if it has been buggered, as many have. As I recall, my NAPA did not stock...

Thanks Shane, Guess I missed that one:cry:. BC

And also Dear Sir, You can charge BOTH the 12 volt batteries you need one at a time with a civilian 12 volt battery charger, BC