Search results

it would be super easy to replace one bolt at a time once you get the right size

I was surprised at how big the rust flakes can get. I found some that came from the reservoir tank and got lodged in the small hose going to the oil cooler that were just as wide as the hose ID! This was one of the lesser flakes

If you don't mind sharing, what did AM General provide? If it's a helpful document that could help others with the same problem, it would be worth uploading.

Follow this Link that will eventually take you to the NHTSA site where they have published their interpretation that AM General has designed its vehicles for road use. Being a 1970 is your truck a Kaiser Jeep? The second part is quite tricky because licensing agents think they need to see a...

I remember reading that they pop off and relieve pressure after a certain amount of pressure has built up. So I imagine any pressure below that would be retained.

Today I grabbed a stamp set and transferred some data over to the tag on the level wind since it took the place of the plate that held that info. It's not as nice as the factory stuff but good enough for the girls I date.

Replacement sticker: https://www.ebay.com/itm/175572425139

For the original 4 batteries or 2 of the big ones?

Thanks!

Oh, you betcha. I haven't contributed much lately so it's about time to throw out another thread. It's reassuring having a way to offload the spare and I'm hoping I never have to change a tire.

The last detail besides grip tape on the ammo can. This piece with a strap locks the stowed mast to the lower mast to eliminate any wobbling fore and aft.

The pair of Beachwood Canvas chain covers arrived today so one went on the hold down chain over the tire and the second one I put on the lower chain since it wouldn't fit over the hook of the chain that lifts the tire. Here is a funny picture I should've added before. I've been having...

A good sized ammo can got bolted to the crane to store accessories and tools and stuff. I'm planning to add grip tape to the lid so it can double as a step stool to get up high enough to crank on the boat winch. I had to drill two new holes closer inboard on that plate to get the ammo can far...

Now it's time to peal back the cover, remove some bows, and assemble this beast to do a function test! Wow this thing is tall! With the 525 lb tire suspended by the crane at full reach the telescoping tube pulled down slightly and that was it. No scary squeaks, groans, or popping...

This is the first mockup attempt to see if reality matches the computer world and it came out pretty close...well, close enough. I was really hoping that the original spare tire anchor parts wouldn't interfere but I won't know until I get a tire loaded up. The boat winch sat a little...

The upper mast has some really fun mods done to it in order to facilitate both moving the spare out of the bed and also bringing it back in. @HanksDeuce added a come along to his crane to help with this so I found a nice boat winch with a strap instead of a cable and made a mount for it to...

Here are some of the parts I designed and had laser cut at work. The gussets are missing but you can see the stowed mast base mount, the boat winch mount, the end stop hoop, and the new top cap for the trolley. With the base frame done, next up is the lower mast which needs its diagonal...

My big project for this year was to build a davit crane to handle my 16.00R20 spare tire and since Jim's price for a used crane at army6x6parts was decent enough I chose to modify an existing A1/A2 crane instead of starting from scratch. This ISO bed davit crane was the inspiration for how to...

Well, thank you! We came out of the covid lockdowns with another kid in the family so I ordered up another NOS H-161E headset for the little guy and he's almost old enough now to keep them on during a drive. 😁

I have one of those after coolers sitting in my basement that I didn't use because I didn't want to chop my hood. If you run one of those without a huge body lift the cross over pipe will stick through the hood just like on the M813 that @bobbed_deuces_wild (Instagram handle?) put together: