Search results

Yes . You can only adjust it so much be for it changes something else .

The linkage on M211 transfer case needs more travel . with your truck jacked up you can check this out . For forward the rod on the transfer case has a spring that pulls the rod in and the wheels on the steering axle will only turn forward . when in reverse the rod needs to be pulled out and...

I have had good luck using a air hammer It's more of a vibration then heavy hits to make the cones walk out.

In the video SIMP5782 is using NAPA Multi-Purpose wheel bearing and chassis grease blue and white tub or tube it's good for your wheel bearings also . Sorry to reply on a question that was not for me . I like using this grease it's always the same color and texture if gear oil gets to the...

I think you will have tire problems long before rim lets go . 9.00-20 single 65 psi 4000lb rating 9.00-20 duel 55 psi 3510lb rating I have always though 9.00-20 on the steering looked low on air and looked maxed out running 65psi I have never had a problem .

I think a back up camera mounted where the driver could see the front winch would work much better then having some one watching that no idea on what they are watching for till it happens .

Welcome from north west New Mexico .

Look at the holes for the lug bolts and they will only be beveled on one side the should only be used one way so the lug nuts will seat and center the wheel .

Yes it is .

I replaced torque rod ends on a trailer going on ten years no fails . The torque rod on the tandem axle trailer uses the same ends as the 5 ton the rod is just a little shorter.

With some engines running hotter and higher pressure I try to change belt and hoses at 4 years

My last trip to the DMV They relied on there computer I tried to get multi fuel on the title because it was a multi fuel I had to pick gas or diesel that what was in the computer. I tried to get Kaiser Jeep on the title I had to pick Kaiser or Jeep (Kaiser Jeep ) is not in the computer . I...

I like scrubbing with a stiff brush and hot soapy water hose it off and spray on paint or brush it on new paint . pressure wash works great you can clean out small places that you can't get to any other way . Bolts I have taken them out bead blasted them and painted them and put them back in( it...

I have used a box end open end wrench cut in half because I needed to use a cheater pipe on it a socket will come in handy to . The threads are all the same right on left off the nut size is 2 1/4 on older trailers some are 2 3/8 .

I have pulled a third member out of my M211 when I found metal to discover it was trash from a past over haul . good luck and let us know what you find .

The only place my 43 White says White is the brake and clutch peddles .

Look at Memphis Equipment site for m35 and it should be listed just needs cut down . when I ordered it was each strip by it's self It is nice stuff not like the rock hard stripping I chipped off .

I think the weather stripping around the door glass and the top are the same as the m35 or 5 ton .

What speed and RPM is your truck is running best at ?

Legally brakes are required . You might check used equipment places and find a commercial dolly .