Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
On the collectors choice form it asked what type of security, I always put Gun. I am waiting for my antique tag and the bill for the 1088 so we shall see how much it is soon. I have three trucks and the one 373 semi trailer with Gulfway and so far it has been reasonable.
Steep mountains high altitudes my .02 still wrong truck. Any problem with the transfer case or automatic transmission over heating you out of luck. At least with a manual transmission you could come down off a mountain in a low gear and not burn up or loose your brakes using the engine with or...
I do not know why you are doing it with the engine running that filter is under suction. If you question anything just change your filters and clean out water trap of any crud. Racor has a 24 volt filter housing with built in electric pump. Just power it up and prime the whole system.
Had to...
Over priced under built as me how I know. Also mine does 70 mph and does not have a turbo if I can find a place to wind it up. Most of the time off road is well under 20 mph if not way lower. If it has the drive belt I believe I see in the pictures you must know when to put it in low range or...
Agree, Wrong truck for the job do not mess with the fuel / injection pump. Myself yea I would have gone with mechanical injection, at least 400 hp with Jake brake and manual transmission plus Hendrickson suspension. Also non military but something that parts a readily available.
Think I see your problem. Tan dash / truck, OD colored speedometer.:driver:
Run your hubs and see if it changes or you find them too loose / tight. Remember Steve said a minimum of 10 /20. Bet it could be .030 and still be fine. We just do not want them running too hot.
Awesomlmtv Myself I would not only do the hubs but go all the way in and repack inner bearings with grease. You could have a inner bearing / race problem so myself I would not worry about ring gear quit yet.
Would be interesting to try it your way then check same hub with Steve's way. It really is not any trouble Steve's way once you have done one or six.:cool:
Believe he did an edit and asked his question on the geared hub thread started by Steve 6x6x6.
To add if you have a gear noise that does not happen on full throttle or complete let off of throttle but when you come to half throttle check your drive line. Might be out of phase as mine was. I...
I just went through today having a new line made up for my Cat fuel line. My NAPA did not carry diesel fuel rated line or the local Hyd. shop but said they could order it. I drove 40 miles to Ocala Hyd. service and they had green stripe and made up my line. Believe there is also R10 hose that is...
Replaced my primary fuel filter to engine fuel line. Was told to make sure it was diesel rated fuel line so drove to Ocala. Nice day for a 30 mile drive.