Search results

Howdy, Run your generator with a good load. Remember, the convenience receptacle is only rated at 10 amps. The fuse reset for it is right behind the front panel.

Howdy, I have been getting into replacing some of the hard to reach areas with rivnuts. That way I do not have to hold any nut.

Howdy, With the current heat of August rolling across the country. Now is the time tp fire up the generator and run it a while. Open the front panel and let some of that trapped moisture out.

Howdy, Yes, you want your batteries at there best. Even with charging and maintaining your batteries does not mean they last forever. The solar panel does all the good stuff to keep your batteries ready for when you need them. Just because I have the G7200 connected to a 24v slave port, does...

Howdy, http://www.steelsoldiers.com/showthread.php?108814-Pulsetech-solar-panel-install-location-on-Deuce&highlight=solar

http://www.steelsoldiers.com/showthread.php?139370-MEP-802-803-fuel-return-improvements&p=1780281&viewfull=1#post1780281

Howdy, If you go into that thread, you will see member AOR worked over the other fuel line item.

Howdy, Usually in the parts for sale area, or post parts wanted area also http://www.steelsoldiers.com/showthread.php?153273-MEP-802-803-panel-components

Howdy, I am happy to help the community with the extra A3816 nitrile well nuts I had purchased. I am glad I was able to get them out for a decent price. I did not realize they ____________ were moving the well nuts along for $20.70 each. wow... aua :-D I am sold out.

Howdy, MEP-803A manuals you should have TM 9-2815-253-24_____ Diesel Engine Model DN4M TM 9-2815-253-24P____ Diesel Engine Model DN4M-1 Parts LO 9-6115-642-12____ Lubrication Order TB 9-6115-642-13____ Winterization Kit Tech Bulletin TM 9-6115-642-10____ Operator's Manual...

Howdy, Your in the field, in the middle of no where, you need to run this generator to stay safe. You need it to run and just work. The Military generators are overbuilt. When a military generator says its a 10kw generator, that is a full 10kw 24/7 and shut down, change oil, and then fire it...

Howdy, You have not given any information about the unit. What you have done and what is not done. steps going forward. download the TM's (Tech Manual's) for your unit. Do a bunch of reading. Browse the forums How many hours? was the exhaust flap intact? does it shows signs of water in the...

Howdy, http://www.steelsoldiers.com/showthread.php?150954-MEP-8xx-series-Replacement-parts Has a bunch of info you will need and listing all manual names you need

Read the forum

Howdy, Weeping fuel return lines. Known as yellow stripe fuel return line (vw, Mercedes, etc...) 3.5mm inside diameter, pushes onto the hose barbs on the tees Fuel return line thread I wanted to make things easier and save the tees. I simply sliced the old lines. Removed the old lines and...

Howdy, Go through the linked topics in the MEP-8xx series Replacement parts thread. It probably is the fuel return lines along the top of the engine.

Howdy, I believe you are talking about fuel return line http://www.steelsoldiers.com/showthread.php?139370-MEP-802-803-fuel-return-improvements&p=1780281&viewfull=1#post1780281

Howdy, It also all depends on what switches are set where. MEP-8xx checklist. batteries in good shape fuel in system oil level good dead crank switch set to normal emergency stop button pulled out phase selector set (behind panel (single phase 120/240 etc)) turn to prime & run wait...... wait...

Howdy, Take a look at the pictures. The well nut is actually a nut assembly covered in rubber (nitrile in our case) You have a hole in the plastic fuel tank. The fuel line has a threaded fitting on it, these threads reach the nut assembly on the far side of this little well nut. When it starts...

Howdy, The military uses a 24 volt lighting system. The military uses a special vehicle and trailer plug. There are threads here with information about making changes. I myself have cut off the military plug and throw on a cheapie RV 7way plug. Yes, you are only using 4 wires. ground, left and...