Search results

Just communicate with them and let them know you are sending a check. Mine gets declined every time, as I have a limit. I send a check out ASAP and everything is good.

Rubber Plug I bought a rubber shock mount from the "Help" rack at the Auto parts store. Works perfect if you want the antenna hole and not entirely plug the hole.

Can anyone tell me the Max. lifting Capacity of the boom on a M816 5Ton Wrecker? Also does it have only one boom that extends out or two? What is the length of the boom when it is fully extended? Thanks

I paid the same money for a similar condition truck W/W. I was lucky to drive it home 150 Miles. However 1 of 3 trucks I was driving home did not make it. After my time, tow bill and having to go back and get it I wish I would have paid the $500.00 to have it hauled.

I bought 3 Gallons over the phone from S.W. in Oak Park MI.

Jump Seats I just put my jump seats in last night. I can comfortably seat 8 passengers now.

Real easy thing to do is disconnect the line at the tank and injector pump and blow shop air through it. Friend of mine did this to his and found the line had some junk in it. After he did that it idled and ran better, stop stahling. Hope that's all it is.

When I first saw the MXT driving down the Hi-way I thought it was a new H1. It sure is ugly in pictures, but looks awesome running down the road.

I'm in the process of painting mine Satin Black. Powder caoted the bumpers and brush gaurd, now I have to get to work in the bodyshop.

Just curious, if you had the choice and more importantly the money, would you buy an H1 or MXT. I'm in between and if my Lottery numbers come in I'm gonna get one of them.

Valve Lash Thanks for the Thread. I just popped the heads back on today and am going to set mine.

Sweet

My M1009 goes 80MPH and sounds nice. My M1028, I am white knuckled and gritting my teeth at 60MPH waiting for something to let loose. trying to save up for an Gear Vendors Under/Overdrive

I will be putting the heads back on my Multi-Fuel soon and I am stumped on how to toque the drivers side head bolts/Nuts. I had to heat and bend a 7/8s wrench to get them off, as I could not get a socket to fit in between the head and nut. I am guessing maybe a Crows Foot? Anyone know the trick?

When I was enlisted as a 63S, I went to 3rd shop with a 88M (might have wrong MOS, a truck driver), to pick up a Deuce and as we pulled out she drove into the outer lane and then back into the inner lane. When we arrived at the motor pool we were greeted by the MP's and a soldier witha lil...

Well I bought a flywheel for a 700R4 with a 6.2 because Car Quest and Auto Value did not list a 400 with a 6.2. Got the flywheel bolted up as it looked the same. Got the tranny back in place and bolted, only to find that the converter bolt holes were off by 1/4". Went on ebay and bought the one...

I put a bench seat out of an M1008 and it is so much more comfortable. I still needed one more spot so I searched on ebay and found these jump seats. When I get them in I will be able to put all seven of us in it. I think these were out of a Nissan. I couldn'nt believe the upholstery was almost...

Had to take the flywheel out finally as it has been grinding since I picked it up from GL 2 years ago. Can anyone that has pulled the flywheel tell me how many teeth are suppose to be on the M1009 flywheel? The parts store found that it should have 136 teeth for a TH400 and 139 for a 700R4. I...

I eliminated the glow plug card and wait light and also put a manual switch in both of my trucks. Works great. I think there is something in the resources under the technical help. I have had to pull my manifold off a couple of times. Looks like more work than it actually is, but yes it makes...

Buy a fuse with a tab off the top of it so you can get 12volts from the fuse box. Very simple process. I did this to mine and it works great. I plug my GPS into it.