Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Yes I searched...some indicated they got the gasket from NAPA...so,
I need a NAPA part number for the flange gasket if one is available, I don't have time to order one.
Thanks,
Ed
Is this kit suitable for pre-turbo installation?,
http://store.summitracing.com/partdetail.asp?autofilter=1&part=ATM%2D7144&N=700+4294925227+115&autoview=sku
I've been reading about some probes not being up to the job for a pre-turbo install.
Hey I guys, I was changing the M/C on a for sale truck today. I bought 3 NOS Deuce Master cylinder's from Kcgonzo on Egay. I pulled the leaking one out of the truck and got ready to install the "new" one. Problem, the "new" M/C fill cap is about 1/3 smaller than the size of the one being...
I need input from anyone who has picked up a truck there. I called and was told over the phone Tues-Thurs loadout/pickup only.....great, just like Barstow....
Any other info you can pass along is much appreciated.
Thanks in advance!
Can some one look at this truck and let me know if it's missing anything major?, that would prevent driving it? Sale number 3648 lot 6409
http://web.govliquidation.com/auction/view_photo?eventId=3648&lotNumber=6409&picNumber=1
Specifically concerned about this picture.....
Thanks!
I didn't have one so I made one. I will "refine" this as I go along.....
Worked great!, now I have to find someplace to store this one while I take the bad T-case out of the truck.
Mods, If this has been covered before, please delete.
These are pics and observations of the 1028A3 I bought from GSA in Utah. First, I believe this truck is a Gov conversion of a 1028 (5077) into a A3. Stickers in the cab lead me to believe this was a USAF truck.
Pics:
I tried a search, no joy. Alfa's 1028A3 says it has 3.73's is this the military ratio?, or were they changed? The vehicle specs section here states the 1028A1 has 4.56......
Anyone have any leads on a vehicle shipper who can move a mid 80's fullsize Chevy Truck for me? I can probably get it myself, but I'd like to see how much it would cost to have it shipped.
Thanks,
Ed
Sold one of my M35's to a really nice guy who lives out near Roswell, Sure the truck is going to a good home. Had to throw in a trailer :P ...... Enjoy her Bill!
Now I need to get the next one ready to go.....
Some pics of the truck and the new owner..
I have 2 trailers to pick up in Santa Fe, 105&101, I'd rather not take the Deuce. Will the M101 fit in the bed of the M105? I did a search for dimensions/specs for the 101 but came up dry...
Or, if someone could measure the width of their M101, at the widest point (outside edge of tires, or...
Well,
Set out Thurs morning from Las Cruces in the 1008 (alone) with all the recovery goodies loaded in the back. I got into Norman about 8 p.m. no problems, hotel, many beers, sleep. Next morning got to the National Guard facility and found Sgt. Lee, I was an hour early, appointment was for 8...
TomB,
Left my house a couple of hours ago headed home in his "new" 109+trailer" Hated to see her go, but must make room for more winch trucks..... :P
Anywho, here's a couple of pics: