Search results

I just got some 12.00-20 tires put on. What's the best way to figure out the correct PSI?

I bought a cargo cover from mountain gear surplus sales. Is it just me or does the picture look like a deuce and a half? Hopefully I can get my money back. Has anyone else used this company?

I'm getting ready to mount 12.00-20 44" tires on my 66 M35A2. I've found the part numbers for 11.00-20 and 395/85r20s. However I cannot find anything for the 12.00-20s. should I go with the 395 one of is there a better option? Also what's the correct cable to go with it

I'm looking into having an existing canvas cover modified to fit like an oem cargo cover. I found a tent company that will do the work for a good price. Unfortunately I do not know what weight of canvas is needed. The heaviest I can find is 21oz after treated. The most common are 10oz and 18oz...

One of my hub bolts snapped at around 90ft lbs, I think the bolts were stressed by someone with an impact. I also found out the rear axle doesn't have drilled hex bolts on the hubs. I'm in desperate need of a source for this bolt. I cannot seem to find anything. In the first picture the zinc...

Started flipping hubs and was unable to find the torque specs for these bolts in the TM.

I've been thinking about flipping the hubs on my truck. I'm currently running 11.00-20 tires singled out. I'm getting ready to run 12.00-20 tires on it singled as well. I've been contemplating flipping the rear hubs outward. However I've been reading about why rear axles are more narrow than...

I just bought some 12.00-20 tires. I'm currently running 11.00-20 tires. Where is a good place to buy new tubes? What exactly do I search for online? Do I just need to buy new tubes or do I need to buy new tire flaps as well?

A friend of mine has a M931a1 that no electronics work at all, no lights, no click trying to start, nothing. He last drove it a month ago. He just installed 4 new batteries. I've been searching for circuit breaker or fuses for it but I can't find anything. I've worked on M35A2 but not any 5 tons.

I recently removed the hydraulic head because fuel was in the oil, cleaned and polished all passages, reinstalled it with new Orings, button and retainer. First time it leaked horribly now after after a tiny bit of fuel gasket maker it leaks less. I also tried to lower the idle but I can't get...

I found a M109a3 Multifuel for sale. Not sure on the year, it was abandon at a storage for years, owner never returned. Tires look very new 11.00-20 stack has a muffler, some rust on the side of the box, needs batteries. The big issue is it has no title. It's from North Carolina but been parked...

Im going to be installing new tie rods soon. Just have 2 questions. 1. What ball joint press works best with that huge size, or are y'all just going to say use a pickle fork? 2. How much and where do y'all suggest to get an alignment done? Sent from my LG-H918 using Tapatalk

I've seen this on eBay. Not sure if it's true. The seller claims this 5 ton clutch disc can be used for an m35a2. Any truth to this? Sent from my LG-H918 using Tapatalk

EGT and Boost. Did my first run with a new to me D turbo, EGT and Boost gauge. The highest EGT was 1100ish before I backing off the throttle, highest RPM was 2450 ish, Max MPH 52, tire size 11.00-20 ,max boost seen was about 14 lbs, max load was approximately 1700lbs of cement/rubbish. Even on...

I currently have the Jatonka fuel filter kit on my truck. The fuel/water filter seperator has a thread of 1-14. The water seperator says thread 1-14 UNF 2B im not sure if the UNF makes a difference or not. The two secondary filters use a 7/8-14 thread. The filters appear to have close enough...

I am in desperate help on how to troubleshoot my truck. I have no power to any accessories with the switch on, no fuel pump, no starter, no lights. All of this was working a month ago. I have bought a test light and a harbor freight volt meter. So far i only see power directly off the power post...

delete post

Ok I cannot figure out how to align the grill. It rubs at the top corners. Ive tried adjusting the bars out the front. Sent from my LG-H918 using Tapatalk

Just interested. Is there a way to know if this transmission is new or rebuilt? Sent from my LG-H918 using Tapatalk

We need everyone's help to fix this issue! The MVPA and AMVO need help to get the laws changed! From the State DMV "we will no longer allow any former military vehicles to be registered due to federal government saying they are not fit for safe road travel." I'm looking at hitting this issue...