Search results

I have several NEW original and unused hose sets complete $30.00 ea. I'll guess Fedex ground at 10-12.00 if shipping is less, ill refund the diff, if it's more i will absorbe that.. any payment form accepted, credit cards check paypal money order most any form i can make work.. thanx mac/mc

Bingo !! we have a winner, perfect timing, Thanx Daybreak, im just back from NAPPA with the 1344 oil filter and will spin it on and see how my water temp situation goes, after more reading the -24 im leaning hard to the T'stat not opening till much later than desired, and PWM cooling fan...

A friend has loaned me his new 2016 build date MEP-1040 10kw set, it came totally drained, and missing oil and fuel filters, The "Wizzard" or Yoda .. Guy Fang, got me on the right fuel filter and I'm using an oil filter from i think my 802/3 stash .. I can see it is a shorter body or...

late support, but i so agree ..royal PITA and like urself, i have a tray full of emm.. best: mac/mc

The wife and what you tell, it hurts when you're gone and see sells emm for that .. I've seen more guys tell this lie than just about anything. And I'm also guilty as they come.. love it.. mac/mc

Thank you very much mac/mc

Hi can you please share with me the oil and fuel filter types numbers, my unit is missing both thanx mac/mc please use libbysales@austin.rr.com to reply thanx mac/mc

good info thanx much mac/mc

I'm proud of your work and competancy level, you did a good job and thanx for sharing your effort and results. best: mac/mc

well hold on, the 10kw if it is a choice will run your pump as well .. please know these 803 sets also produce 3 phase with the flick or turn of a interior selector switch and your in business, then find the step up/down 3 phase xformer I mention and again your all set if you have access to an...

the 804 will make 480 with no problem, sorta, several sub systems will need to be recalibrated to avoid trip points set for the 416 range but if your up to it then its not much of a challenge, at 480 your low side will be 277 but I would suggest you set it for 460/265 then you have the easy...

Where or did I miss that while not shown the 'capacitor' was determined to be BAD.. If not proven bad, then put it on with what you are using if you are just determined to have it on. your assumptions are generally correct about smoothing or filtering the voltage and or noise levels. While the...

I like this idea using it to cover the openings in several locations, thanx Joe mac/mc

I'm with Smokin Joe, its the very first thing I take off, while I don't toss them in the trash, unless I sell one and a buyer specifically ask, its the last thing I ever think about. Those guards are for the most cautious of us and I'm not in that category, I still have a decent sense of...

Well dip stick here is wrong, and you are correct, it is MARKED N not LO however same effect, bond the N and G together, usually a silver plated strap is to the right side of the N terminal, then you are all set once more to proceed. my strong point is just be sure your voltage selector switch...

Well first be very sure you have the internal voltage selector switch set for 120/240 operation, and then don't change this position ever, under engine operating conditions. then hook your LINE wires to L1 and L3 and ground/neutral to LO and you said you have already bonded these two terminal...

I made mention of a SS reader making a good u-tube video but omitted his SS name Chris DielselAddict is his user name here on SS best mac/mc

I would offer you find another 005 ? Reason, the 005 Generator output is 12 lead and can very safely wired for 120/240 operation unless your in love with the idea you presented and knowing your best line to line voltage will cap out around 212-215 but not 240 unless you can accept the line to...

Readers, I have need for Oil and Fuel filters for the 007A, Air filters I have located and in fact have several "extras" available, these also fit the 006 using 1 each and 2 for the 007. Direct email is best and fastest use: libbysales@austin.rr.com or here at SS as you choose. Thanx mac/mc

Yup for me and my fat hands I just decided it was safer to disconnect the batteries and loosen the alternator and belt then get into the draincock right dead in the middle of the area and work the drain valve and get the remaining fluid out.. Smaller hands wont need this effort, but to me it...