Search results

Everything starts somewhere. I wonder at the start of the historic plates that are in existence what people said, possibly the same thing. The plates will be around for many years to come after we all pass and I’m sure the numbers will increase. The world is not coming to an end any time soon...

Someone replaced the lights and added adapter for normal lights which caused the issue Sent from my iPhone using Tapatalk

senhhopgood@senate.michigan.gov Sent from my iPhone using Tapatalk

The 2nd version is the correct one. Sent from my iPhone using Tapatalk

Hello That is absolutely correct. Also it does not infringe on any pre existing laws but establishes grounds for titling to avoid denials from the sos and also includes the creation of a historic military plate for those who wish to obtain one wether you chose to display your plate or not based...

So I figured out the problem with the headlights. The wiring in the engine compartment on the lights was correct however when you pull the headlight bulbs out they had the wires plugged into the wrong spots. There is no markings on the headlight bulbs as to which connects to what so I just tried...

I was thinking that also but the numbers on the wires match up. The high and low lights work it’s just the high beam indicator. Somehow it’s getting constant power. I might check the foot switch tomorrow first Sent from my iPhone using Tapatalk

So I found out the problem with the blinker. It had nothing to do with the grounds but it was the blinker switch. I opened up the blinker switch and bent the metal prongs further away from the contacts and now all my blinkers work perfect. The next step is to figure out highbeam low beam...

Thank you I will give it a shot Sent from my iPhone using Tapatalk

Thank you everyone I will try and check the grounds ASAP will advise update Sent from my iPhone using Tapatalk

Hello, I just purchased a 93 M998 and have a couple of issues. Hope someone might be able to point me in the right direction. High beam indicator comes on with lights on no matter if its high beam or low beam the light is on on the dash. 2 nd issue is the right blinker. When I turn on the...

Any idea how to get the breaks and turn signals to work without operator having to turn them on separately? That would be perfect and then use a switch to turn on the headlights like an older car. Sent from my iPhone using Tapatalk

Hello, Has anyone tried to switch out the standard light controller for a set of rocker switches or toggle switches? I would like to eliminate the old style light switch and use a set of rocker switches if possible. Anyone have any idea how to wire something like this up? Also has anyone...

Hello If anyone needs to know all you do is pull out the spring and then you can pull up the rubber with the wire attached. I used a wood screw and lightly screwed it in to pull up the rubber with the wire. Sent from my iPhone using Tapatalk

Does the wire just pull up from the top side? Because right now the horn button pushes into the shaft where it touches the wire. Sent from my iPhone using Tapatalk

Do you know how to remove old wire from the middle of the steering column? That is what I was thinking remove that wire and put a solid wire up to the horn button but I am not sure how you remove that wire from the center of the shaft. Sent from my iPhone using Tapatalk

Hello I just replaced the steering wheel with an aftermarket steering wheel and would like to connect the horn wire. Does anyone know how to remove the horn wire from the steering column so that I can connect a solid wire to the new horn button? Or does anyone have any other ideas on how to...

Anyone have any ideas on making a new doghouse to include cup holders and possibly a radio in a m998? Sent from my iPhone using Tapatalk

This is the pin. Need to know what it’s supposed to lock onto. [emoji848] Sent from my iPhone using Tapatalk

Hello, i just removed over the doghouse for the first time and realized the top 2 pins are not holding. When I look behind them on the metal bracket all I see is a hole. Nothing for it to grab onto. Any idea what I may be missing?