Search results

Going through a low hour, good condition 802 for an existing customer. This thing was on a trailer, way up and away from problems... Looks super clean and in awesome shape right? Almost EVERY single time.... and you won't ever know unless you take the roof off and/or see sign near the air...

Just go with something made to work with the MEPs (and will readily fit into a 2" NPT fitting): https://www.steelsoldiers.com/threads/generator-aux-fuel-adapters-and-new-scepter-fuel-cans.217904/ The brass tube won't be long enough to get to the bottom of a 275g tank, but a length of oil proof...

Back in the day, we didn't live in a throw away world... AND we had people with technical ability. Crazy, right?

The scan isn't that great. There are print manuals out there for sale. I don't think Honda made this machine very long, so its doubtful to find something readily scanned higher (since this is literally what Honda offers).

Have you been present when the AC dumps out while running, and if so, any audible change or gauge spikes or anything to let you know whats happening?

Does the machine produce power, then suddenly stop (while still running) or does it just not produce AC at startup sometimes, and you need to start it again to make it produce?

Here is the manual for this rare beast if you dont have it: https://cdn.powerequipment.honda.com/pe/pdf/manuals/31ZC6612.pdf Is the AC switch on, or something that should otherwise be OFF at starting which would initiate a kill circuit for safety sake? I don't know if the two sensors you...

That is indeed the same part, looking back at the thread: https://www.steelsoldiers.com/threads/mep-002a-003a-frequency-transducer-replacement.198094/ For those who missed out when they were dirt cheap... they are still pretty darn cheap over at Eastern Surplus (and they are a SS vendor, so its...

Well if containment and legal install is what you want, Roth tanks are an all in one option with excellent quality and are fully compliant (plus the 2" NPT tops easily allow for an MEP aux fuel adapter to be used). Standard sizes are 100g, 275g, and 400g...

Here is one source: https://tex-tanks.com/tanks/aboveground/belly-tank/ Can you not reuse the 114g tank for this? The significantly cheaper method would be to just run 55g drums beside the machine, or tether it to a home heating oil tank. All scenarios (including belly tank) would require...

I think this is the magical question here. See the flow chart from the TM (black circle added): If you didn't build sufficient oil pressure, you will get that light and the machine won't run. If you do build sufficient pressure but the MPU (magnetic pickup) is a little out of adjustment, it...

Sounds like they are, in style :)

I've never had one leak.

A beautiful thing when all the time and money pays off.

I have a used (but tested) fault panel out of an 802/803 if you find yourself needing one.

I rarely put in the effort to take them off. Some of those bolts were a PITA to locate top and bottom, so I'd just let the next owner deal with them.

I've got 2 trailered sets here that some may be available from.

It does sound like you just need different equipment, than what you have.

Just a good time to check the in tank components for corrosion (the fuel level float especially). The double float aux fuel switch are notorious failure points, so take care in removing and replacing. Not much else going on back there from a preventative maintenance point of view past that...

Its absolutely possible to backblow the fuel drain to clear something up, but as its a gravity drain, whatever is displaced will simply end up back there. It might even be part of the well nut, FOD, you don't know. Compressed air never hurts as a step one to see if it helps get some of it out...