• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. NDT

    Dead Pilot's M38a1

    I couldn't get mine off either. Been running around now with 69 year old grease in the wheel bearing I suppose.
  2. NDT

    Locating a part for the wrecker

    Try Red River Parts & Equipment
  3. NDT

    2024 TX MV Rally

    Same problem here.
  4. NDT

    Dead Pilot's M38a1

    Well I did, but clearly my memory has failed me, it’s been 37 years since I replaced that plate on my A1.
  5. NDT

    Turbo vs no turbo

    The NA deuce is just fine, leaves a little smoke trail wherever it goes.
  6. NDT

    Dead Pilot's M38a1

    Is the builder plate still on the sponson behind the driver (edit: passenger) seat? Will have paint all over it. This has the serial no on it.
  7. NDT

    Dead Pilot's M38a1

    Nice! Not a 1952 though. A 52 would have the hinged grille and thumbscrew retained battery box lid.
  8. NDT

    Electrical system

    Milspec OEM black rubber insulated wire available at Erik’s Surplus
    • NDT
    • Post #9
    • Forum: M37
  9. NDT

    Hi-lo range

    This is the heavy af T-138 transfer case, the arrow is pointing to the hi-low shift rod. That has to move in and out to shift the Xfer.
  10. NDT

    Hi-lo range

    Yes and there is nothing easy about fixing these. First you need to make absolutely sure the lever and linkage are free. Check that and report back.
  11. NDT

    Need help with manifold valve on new to me M149a2

    I would consider replacing the valve with a tee and putting ball valves on both sides. PVC fittings would be very reasonable. Some green paint and nobody will know.
  12. NDT

    Hi-lo range

    Seems like you can pull up on the lever 8 to 10 inches. If you are in 5th at 35 mph, you are in low.
  13. NDT

    Hi-lo range

    10 o clock
  14. NDT

    M35A2 gvwr

    here you go
  15. NDT

    Multifuel in tank pump problem

    Fuse is on +24 volt side. It’s possible your tank has 1” of spooge in the bottom, did you check for that? You should be able to hear the pump run, if not, it’s not getting electricity.
  16. NDT

    Need help with manifold valve on new to me M149a2

    McMaster Carr is my go-to for O-rings. Any Buna-N rubber o ring should be OK I would think.
  17. NDT

    Mercedes-Benz M906LA Diesel

    Husky MRAP looks like.
  18. NDT

    Replacing ignition system with new system.

    If all the plugs match up I would try that before cutting wires. The module connector looks identical.
    • NDT
    • Post #4
    • Forum: M880
  19. NDT

    Need help with manifold valve on new to me M149a2

    Valve stem must be rusted in place. Disassemble/soak/clean etc
  20. NDT

    Replacing ignition system with new system.

    That kit is to convert 1960's vehicles to the 1970's "module" system which is stock on the M880. Not sure what you are trying to do.
    • NDT
    • Post #2
    • Forum: M880
113,484members
166,741threads
2,347,707posts
2,049online users
Top