Search results

Yeah, the deuces only have space for two batteries in the box under the passenger-side door.

Add no-rear-hub-flip required for singles and some longer service intervals to that list! The 5-tons are definitely more truck than the deuce, especially in the durability department. But I guess they aren't as practical to take grocery shopping, as much as I might take a wrecker out for a...

My A3 shows air on the gauge about 2 or 3 minutes after startup. Once the compressor cuts off, the air dryer discharges. The air dryer discharges every time the compressor cuts off. I find it odd your gauge isn't working right. It's building air and blowing the safety and you're showing zero...

I'll see if I can help and learn something at the same time. I really should get more familiar with the air system on my M35A3. Are you getting a warning buzzer with zero air pressure at the gauge? Or is the buzzer not sounding at all?

When running singles on the back of a deuce hub flipping prevents additional wear and damage to the wheel bearings. The M44 trucks (M35A3 and related included) came from the factory with the rear hubs flipped to run singles. The 5-tons can have their hubs flipped too but it's not necessary. I...

Even though the torque multipliers are made of Chinese cast iron, they've done the job for me. I used them to set torque on my A3 rim clamp rings (450 ft-lbs), using a 1/4-in torque wrench and doing the gear ratio math and accounting for about 15% slop (which I verified with a torque meter)...

Great find! Now you need an A1 and A0 so you have all four flavors of power :driver:

Welcome to the site! And nice truck :cool: If I got a bedless deuce I'd consider putting a LMTV bed on it. Sometimes dropsides are a nice thing to have!

Fortunately the maintenance TMs for the trucks go into great detail in how to do the job. Be prepared to carefully handle the hub and brake drum - they're pretty heavy, so you want to face the assembly straight-on and carefully pull it off the spindle and set it on something like 2x4 boards...

Fortunately I had no Privates to worry about directing traffic here :D I had one of two military trucks at the lineup. The other one was the MRAP owned by the county's sheriff's department. I think it's an International M1224.

This was my first time in years driving a MV in a parade, and my first time driving my truck in one! My family and friends rode in the back. I had the tarp rolled up so they were in the shade getting a breeze while I was just in the shade getting little breeze :ROFLMAO:

I made a video showing how CTIS was added to the original 2 1/2-ton axles and how it gets air to the tires:

I'm betting you can find someone on here to trade your M36s for M35s, maybe even bobbed ones. I wouldn't cut them up. I'm still sad the farmer across the street cut up their three or four gasser M36s, even if they no longer had the cargo beds on them.

I meant 3rd through 5th gear by that. I think I understand what you're saying now. I originally thought that shift collar stayed engaged after 3rd gear and never considered it beingin a neutral position. I wonder then if the noise starts in 3rd gear if that shift collar is related to that...

That makes sense. If that sleeve isn't there or working at all the rear shaft won't spin 3rd gear and up.

Based on what I learned yesterday from studying the transmission TM diagrams (thanks again @gringeltaube ) and the problem you're describing, I'm wondering if the problem might be here: That shift sleeve and synchro need to be engaged 3rd gear onward. Perhaps it's broken and slipping?

Inspired by a recent thread about a concerning drivetrain noise at 3rd gear and higher, I took a hard look at a diagram out of the maintenance TM for the Spicer 3053A. I am by no means a transmission expert, so this has been a bit of a learning experience. Whoever designed the very first...

That's really cool! If I get another truck without seats and bows in the back I might try this (y) I think a LMTV bed tarp would be perfect.

I had no idea there was a removable plate on the bed wall o_O I'm going to have to take a close look at that part of my cargo bed now!

PM sent. Turns out I was mistaken about the revenue limit on the Fusion license - it's actually $1000. How they'd know how much you make while using their software as a tool I have no clue! Here's the personal use link for Autodesk Fusion: https://www.autodesk.com/products/fusion-360/personal