Search results

I bought a 1967 M52A2 from Boyce Equipment more then 14 years ago sight unseen and they shipped it to me . I was a running truck not a rebuild they did what was needed to get it running and working as it should and it did I was and still very happy with it . When I got it I still went...

Spin on filters where the best modification done to a multifuel I could finally get a true reading when checking the oil .

GunFreak25 It is always good to see and read your posts . I have had a hub get warm on the road on the way home and stopped pulled the axle and removed the outer seal and put the axle back in and parked on a slopping bank to let the bearings get some gear oil and came home the inner seal...

I have had broken teeth on the ring gear from a hard down shift on my M211

I have two multifuel engines in my front yard if you want to come look for what you need '

In 1982 I bought new a 3/4 ton Chevrolet 6.2 diesel 4 wheel drive with a manual 4 speed with manual clutch I put a lot of miles on it with no problems.

This book has great pictures of military trucks and trailers if you can find one I bought this one off E bay some time back

This bleeder from Harbor freight works great on these trucks

bottom seat closed cab CCKW all the springs need replaced some are broken I also have the straps that hold up the seat

I have a lower seat that needs a a complete rebuild I will post pictures in the morning

The 5 tons with the Mack engine has about 1 1/4 of the top frame flange cut out to move the engine over to the right to help miss the third member . The tip fan on the multifuel is lower then the top of the valve cover and there is not much room between the hood and the valve cover the...

I think now before you take a number and wait there is a person you check with to see if you have what you need . good looking truck .

When registering in NM I found out that Kaiser Jeep is not in there system you will have to pick the name Kaiser or the name Jeep and multifuel is not in the system you have to pick gas or diesel . There system also has problems with the serial number not having 17 numbers ...

Behind the reflector there is a disc that will push out that holds the reflector in the reflectors can be found at any auto parts store .

I have had trouble on equipment through the years with different types of fuel lines where the inner liner separates from the outer part of the hose some times it happens near a heat source . It seams the equipment will start and run but when more more fuel is pulled through the line the...

Having a front winch is very useful and using a helper is fine they can watch that the cable spools up across the drum but when done winching I trade place's so I can make sure the cable spools up right then I tell them to push the clutch to stop other wise when the hook and chain get close...

Height is 14 feet 2 inches

I'm not sure I have had thoughts of removing the axle and landing gear a setting it on a pad for storage or insulating it and finishing the inside for a reloading room . With the fifth wheel all the way back I was able to run the winch line under the fifth wheel and hook up to the center of...

I bought a pup box trailer and went to pick it up it has been sitting in one spot for about 25 years the air brakes where caged so I though the lines where damaged turned out they where fine .The lights worked filled the hubs with oil adjusted the brakes aired up the 11 24.5 tires and...

I moved my filth wheel back so I could pull a pup box trailer home this week ,