Search results

Dave08 Gulfway for insurance. You can get a permanent antique tag for any ex-MV in Florida regardless of year. You have to mail a form in to Tallahassee to get it now; you can't get them at the tag office any more. I have permanent antique tags on both of my trucks. Search is your friend...

3/4" impact wrench.

The reason the right rear tire spins is the rotational load of the drive shaft puts more of a load on the left rear (drivers side) tire there by un-loading the right rear. That's why drag racers have a airbag on the right rear they can put air in to load the right rear tire. You can do the same...

Welcome from Orlando, Florida.

Almost makes you want to run the exhaust out the side at tire level so you can share with more people. :D I had one of the rice cars with the buzz can muffler and a loud (thump, thump) stereo pull up next to me at a stop light when I was in my F350 turbo diesel. It has a custom program and if...

You can tell a Yankee if they don't know what to do with a boiled peanut. Stone ground grits and boiled peanuts sound good to me. :beer:

Looks good, keep the pictures coming!

Looks good mastergunner53. I really like the way you have done the cabinets. Keep the pictures coming. On the house batteries. I have 2 deep cycle 12V in parallel in my RV. They will run the furnace all night with no problem. The furnace in my RV is 20K BTU, the RV is 28 feet. If you...

I have an A2 and had the (sense?) wire to the alternator come off on the way back from the GA rally last year. Same thing, the volt meter pegged over voltage. I shut off the master switch and drove about 20 miles to a rest area and soldered a new connector on. No damage.

Ego, Chris? :shock: Wall to wall carpet and some paneling would be nice.... Oh yeah, sky lights.... lol

And what really matters, the pictures are finally getting bigger!

Looking good Chris. If I put my nose right on the screen I can see what great progress you are making.... HAAA!!!!! Skylights are good. I have two in my RV. They also let a lot of heat in when it's hot so I cut out some styrofoam pieces to fit inside the frame. Makes a lot of difference...

Good job!!! Looks great!!! [thumbzup]

:ditto:

I'd clean them up and see if the race/cup is pitted. You might be surprised. I had one that the race was pitted so I changed it. I got my parts from OD Iron. The prices are good and they have everything you need.

1970 Kaiser Jeep

Yeah, cut the ears off and put a snubber on. I doubt you will load it enough to bottom out, but it might hit if you get it cocked off roading.

I think GVWR for a M818 is about 57,000 lbs. Probably not enough payload left after you take into account the trailer weight.

No....

First time?