Search results

i guess I should contact CARNAC and have him tell me what the part number is. I know I suck at guessing correctly.

Is the wiring for your truck stock? Is the GP controller card installed and functioning? You need to find out if the new relay uses the mounting bracket as a ground. If it does then your system will not work properly. The way the truck is setup stock, with the ignition in the run position the...

I have two of those and one smaller adjustable. First one I bought I paid $400 for with feet. I have always heard of them called heavy-mediums. Works with 5-tons and smaller. I have towed a M915 with it. M809 series, M939 series, CUCVs and even a Gama Goat. Usually I am hooking them up by myself.

Since you have changed the equation by changing the hoses, I would clean the valve cover, top everything off and run the truck hard for a few hundred miles. And then recheck the truck.

Is that better than a one-legged cactus? ;-)

Every truck is different. On the trucks that I have owned, most liked it when you could just barely see coolant in the bottom of the filler neck. I do not claim to be an artist but this picture will give you an idea.

I'll be right there. Just let me fire up the transporter.

Deal!!! When do you want me to pick it up? :mrgreen:

I'll come down and drag it off for you. You still owe me a battery from the Ft Sam recovery a "few" years ago.

Always remember that the airpack is the first item on the list when you are bleeding the brake system.

Welcome. Stow your gear, grab a bunk and settle in for a great ride. The M38 has a whole forum of its own http://www.steelsoldiers.com/forumdisplay.php?39-M38-M38A1-and-M170

The forum rules do require at a minimum that you list your State of residence. Please update your user profile. Back to the subject at hand. The TM 9-2320-289-34 technical manual has a section dedicated to the rebuilding of the alternator. It covers it step-by-step. And it has pictures. It is...

Your Cd player stopped working because you connected a 24v to 12v converter to a 12v source. Battery1 and the driver side alternators are 12v. Please keep all of your related questions in one thread. Digging up multiple old threads and posting the same question multiple times is frowned upon...

You are fine. No issues. Threads go off track very quickly and I was just reminding members of the rules.

Read the size of the link on the black plastic cover. It will say 12 or 16 The red wire at the 24v POS terminal block is 16ga The blue wire at the 12v Terminal Block is 12ga I can tell what the size is because of the color of the wire. Here is a picture of a link connector. I have...

Have you downloaded the free technical manuals? Where did you tap power for the CD player? There is a good chance that your heater switch is not working properly

Lock them in and come on out. ;-)

Welcome to the site. While this isn't the only place to get a kit I have used them many times and have had good luck with them http://www.aspwholesale.com/index.php?act=viewProd&productId=5137 When you are removing the rear bearing, make sure you support the case somehow. If not you will...

I think he is asking for a picture of the cable hookup at the MEP itself, as in which wire to which leg. Of course I could be wrong. ;-)

Just a reminder for everyone. Zombie threads are not allowed.