Search results

Did you take a sample from the fuel filter water drain? put some in a glass and see if it phases out. Do you have a working temp gauge??, IIRC you have not mentioned what the temp gauge was doing during these runs.

Was that on a M35 or a HMMWV?

I would like to find a set of those wheels/tires, they are much wider than the stock 404 wheels, I run 1100-18 Gama Goat wheels and tires on mine.

I would assume it would have a standard 404 transmission it only has two sticks, the 6 speed and the 2W/4W/4Wlock shifter

PIC?

I found a couple pics on the interweb. Evidently one is being used in a online war game. Pretty dang cool!!!

You should edit the title to something like "SH405 armored 404/S Unimog" Do you have one?

Seadek is for "flat smooth surfaces", that would lead me to believe it may not work well on contoured surfaces.

The fuel access cover kit number is 57K3529 you can google it and find a few places you can buy it, others will be govt. suppliers that will not sell to the public. OR you can put a want in the classified section here and possibly get a better deal.

Absolutely if it is enough to cover the damaged area, RWH can probably set you up with a piece also as he said above.

The "other repair" is the access door to the top of the fuel tank/sending unit.

Moved to a more appropriate forum.

UPDATE?

No, the P400 can make those numbers but it was a very expensive engine that had special crank, pistons extensive block and head work including a girdle to keep the lower end together, it also requires computer control, those numbers cannot be made with a mechanical injection pump. The 6.5L...

I just bought 1/2" body pucks, I will look for the link later, then used some 1X1/2" aluminum bar to lift the hood hinges. that was all that needed to be done no steering or fuel tank needed. I started with a M998 with a three speed and wanted to do something different and that was possibly the...

His UOC is NNN

He should have 12" rotors so the one Coug referenced should be the correct one.

Any time a dealer says "fits" or "replacement" it usually means it is a knockoff part.

Here is the link to my conversion, it is a little different as I had a 6L80 transmission but the info on the trim pieces starts on post 8 with part numbers. https://www.steelsoldiers.com/threads/m998-turbo-conversion.208656/

I have a thread on this, basically install the two trim pieces for the turbo dog house, the old exhaust will work as long as you have the correct down pipe and you should do at least a 1/2" body lift.