• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. FloridaAKM

    thinking of buying second mv

    In theory it sounds good, keep us in the loop as to how it goes!
  2. FloridaAKM

    Re: Air pressure on the brakes of an M1081!

    Pray tell where the tractor valve is located as after many hours looking thru the TM's equals brain lockup! Not to mention that the mechanics removed all the caging bolts from the rear axle & the rubber sealing plugs!
  3. FloridaAKM

    Working on the M1078 LMTV

    Something let the magic smoke out of that circuit board! Time for a new one! Nice that you found it!
  4. FloridaAKM

    City owned LMTV

    Murphy must have been busy with some other FMV out there, good job bringing her home. Now we need a detailed after action report with pictures when you get a chance!
  5. FloridaAKM

    Working on the M1078 LMTV

    Cargo covers are for more than show if you meed to go to Home Depot for more lumber than your normal daily driver will hold!
  6. FloridaAKM

    How many "OLD" guy's are just getting in to a LMTV ?

    I'm 60 now & bought a Deuce two years ago & an LMTV two weeks ago. The LMTV is easier to drive around & the Deuce requires preplanning if I'm going to take it work or to a show; but wouldn't trade either of them. They just have that many smiles per miles factor regardless of the cost of...
  7. FloridaAKM

    My truck shocked me!!

    The old farm electrical systems of yesteryear were 32vdc from the power system grid. They did kill a few people unfortunately due to folks not knowing that the low voltage could kill them. Be careful around the 24vdc systems on these trucks as they can zap you when you least expect it. Most...
  8. FloridaAKM

    SF-97 Gov Planet to stop providing them ?

    So the form SF-97 is in the holding pattern for the LMTV I purchased last week on Gov Planet?
  9. FloridaAKM

    Is this a investment ?

    It's more of a divestment of your money from your wallet to Gov Planet. It is like a boat that always needs something else new or repairs on the original boat. When you go to sell it, you will never (except in a rare case) get you money & time back out of it! IT's a hobby that most, if not all...
  10. FloridaAKM

    thinking of buying second mv

    Now you know you just can't have one, so go buy it & then figure out what to do with it! You only live once!
  11. FloridaAKM

    Hi from Germany

    Welcome back & don't forget to post some pictures of your trucks!
  12. FloridaAKM

    new from western ma

    Welcome to the addiction & you have a good looking truck there!
  13. FloridaAKM

    M353 lunette height

    If I had to tow the M353 350 miles, it might still be on the side of the highway! With the tires aired down, it would be a different story as long as the trailer didn't start that bouncing @ 32 mph! The full sized truck that towed it 80 miles had no bouncing @ all? Even @ interstate speeds! Now...
  14. FloridaAKM

    Neophyte LMTV

    Welcome to the club & you forgot to post pictures so we can see your new ride. My air buzzer does not operate at all, probably disconnected along with other stuff the mechanics were digging thru before they sent her to DLA! Enjoy the new hobby!
  15. FloridaAKM

    Found something unexpected in my LMTV today

    :funny:
  16. FloridaAKM

    Working on the M1078 LMTV

    Its an alien nasal/ear probe; designed to see if the driver has enough sense to figure out the battery system! My truck has the same little gadget & all the batteries seem to be fine. The truck cranked up fine with no problems, but I charged the batteries till the charger quit pumping in juice!
  17. FloridaAKM

    Found something unexpected in my LMTV today

    I found one of those in my truck several days ago, it was on the transmission hump in a pile of fur & bones. Its wire eating days are long gone. I hate mice as they have gotten into two trucks of mine & wreaked havoc on the wiring & hoses. Moving them to another location in the yard stopped the...
  18. FloridaAKM

    Re: Air pressure on the brakes of an M1081!

    It's the gladhand for sure, so I'll go look at the shuttle valve to see the condition of the diaphragm after disassembly!
  19. FloridaAKM

    Re: Air pressure on the brakes of an M1081!

    Re: Air pressure on the brakes of an M1081! I can't build air pressure past 60 psi in the rear brakes & the front brakes gage is not registering any air pressure. The front brakes work well, but the rear brakes won't release anymore due to low air pressure. Since I can't wrap my mind around...
Top