Search results

Remember the very first thing is to make sure you have a working trans light when in run but not running. If you don't you cannot proceed, you could have a bad light, a power issue (or other wiring issue) to the TCM or a bad TCM. It is usually all down hill after getting a working trans light...

So an awesome tip came my way about the driver floor vent. Part number 6088815, only $200 (Mac Motors) It does cure the basic/A1 lack of vent, just bore a matching hole in the cross vent!

Put a want in the SS classifieds, someone likely has a used one. I have one but it is for a basic/A1

It would be helpful if you could provide a link or source.

Yes it needs a regulator, the regulator excites the field that causes the alt to produce energy.

We have a front moving through today so I stuck the DuraVee back together (installing A/C) and went to town for lunch, a little 40 mile jog, forgot to take a pic, then I had a buddy ride me over the George West to pick up the scooter I bought for Pam, a 22 Honda Rebel 500 with only 400mi on the...

Since she was a "celebrity" I had to let her go, she was brokered by Glen Britain so I have no idea who bought her. I did keep the extended foot steps (that go inside the wheel) and the Gama Goat wheels and adapters, they are on Air Mog at this time.

Make sure you have 24V to the ign. and output terminal when in run position, does the heater fan run?

It uses a push on fitting so it is not high pressure

Aux fuel line?

Are you getting this fully warmed up as in driving it?

The IP is the injection pump on the engine. look for smoke and do not grind continuously on the starter. If you are getting fuel but the engine is not hot enough it should smoke when trying to start. The wait light just flashing on and off is normal if the PCB thinks the engine is warm enough

If it has only been say 1 hour since fully warmed up you should not need glow plugs, does the temp register at all when this happens? It may be some other issue like the run solenoid not picking up when the IP is at a particular temp. Describe in detail the symptoms when it fails, does it try at...

Yea, that was the second biggest mistake I made, of many

It had a M180 2.8L with the dual carbs and an aux radiator behind the battery box IIRC. The Thing I was proudest of was the slalom course, standing start flat road course, competing against many high powered trucks, Jeeps with small blocks PS etc. They said I touched every but did not turn over...

A friend of mine that helped me form and weld the required roll cage for my run in the 1995 Top Truck challenge sent me this pick. I have the magazines around here somewhere. It was called MOGZLA because of the 6 digit limit on TX license plates. Those are Gama Goat tires and wheels, could...

I suspect you have miswired whatever you built to bypass the PCB box.

Unfortunately the rattles, squeaks and leaks warranty has expired.

Those Extreme Outback compressors are not cheap, I have not seen any on the surplus market lately :(

I did send him a PM, I did not want to publicly rake a new guy over the coals, TOBASH has no sympathy for a new guy.. ;)