Search results

We shall go when I get some time off how was the drive back from Wa?

If you sell them I'll take a few let me know

can you get more pictures of them ?

Green iron !!! i want a M1009 and a M1028 now. that is all

what type of filters ?

woodson is a little far for me hollister would work or pismo either one im open to. again Palermo is a bit far for my tastes me and hulka where thinking some where in the bay area or hollister or pismo

LMC truck has a ton of stuff for chevy trucks. as for the blinkers you have a fuse under the dast in the fuse block and the flasher also is in the fuse block. it could be the actuator arm it self not hitting the detent all the way or you might just need a new blinker switch arm lmc has them so.

dude want me to bring mine by ? just let me know if you want to ill head over some time so u can check it out

i got my M1008 for 1k :)

you will have to do some small fender trimming on h1 tires they are 37 inches tall

its not that hard if you have a Chilton's manual and proper tools lots of people in my 4x4 club rebuild there t cases all the time. FYI Bill the cat rocks !

just fyi pirate 4x4 is not jsut for trouble there is really good people there also you jsut need to go with a grainassult Pinbill welcome to SS you will find lots of good people here also

whats your amps gauge read when your warmed up ? is it in the green or still yellow ? have you made sure your belts are tight on your alts and both of them are working properly ? and all the conmnmections are tight liek to your batt's and to the alts ?

thats what i was talking about :)

i soo need to paint my truck but i need to replace the passender door from an other M1008 to keep the interior green unless some one knows what paint matches the green interior

thoes links no workie.

did you tell the company you got your lift from you had a K30 ? also do a u bolt flip in the back so the rear u bolts have the nut on top of the axle instead of under it so they wont get caught on anything you just need u bolts plates from DIY4x4

your 456 gears will do fine

you can fit them with a small lift and fender trimming one of the guys on here is running jsut a off road design zero rate block only and he has 38's. are you running stock H1 rims ? if so you need to recenter the rims or use spacers ( i dont like that )

yep the new base's are BA i was happy with mine and how easy it was it install