Search results

you can do graphics in camo

Dave I didn't get the trailer just the tarps and some bows.

Is it time to start a bring swap thread yet? I'll let you Ohio boys make that call.

Thank you Jeremy that is what I was looking for.

I've got the tarp but need the number of bows that go with it.

I have checked the TM and other threads on here and can't find how many bows go on the trailer with the side boards on. Anybody know? Thanks in advance.

The Technical Manual for Medium Maintenancetent is TM 10-8340-207-14 http://www.liberatedmanuals.com/TM-10-8340-207-14.pdf Parts list is here http://www.tentnet.org/tentnet/basecamp/maintmed/maintenancemediumencl.html

Can't tell from the picture but if they are old school etched try this. http://www.steelsoldiers.com/showthread.php?71629-Anyway-to-restore-faded-data-plates&p=1294889&highlight=restore+plates#post1294889 post12

Welcome to the site from another "OF", just 5 years your junior just across the line in KS. You should have gone ahead and bid, the hardest part of a 928 is getting in the cab!

Nice score, they are better suited for up your way. My buddy has one and down here it overheats if it idles for awhile.

another LM-105 Found another one, the Air Force had cut a hole in the front for a window AC. Thanks to the hole I can tell they used cardboard to honey comb the wall panels, got to love the 50's! It looks like the same under carriage as your, and has the cranks for the dolly legs.

I have been using house paint for years on my MV's and the best results as far as bonding go are on top of rough CARC that has been degreased and power washed. When I have repainted a truck that a Fire Dept had put a gloss automotive paint on, the bonding is not as good, seems to take forever to...

:ditto: Same thing happened to me on one of the paint jobs, give it a few warm dry days to cure out and if they are still raised use a 3M sponge sander block, wipe dust off and repaint.

http://www.steelsoldiers.com/showthread.php?92086-New-Data-Plate-Source&highlight=data+plate

Just making sure you have removed the 1 1/2" Budd nut first. For duals 1 big nut first,2 outer wheel,3 Budd stud/thimble, 4 inner wheel. I hate to say it that way but have seen it happen before in the Army.

Ray got a picture of the heater from the inside? How much space did it take up? As always top notch work.

I with several others have done the HMMWV seat swap. Gimp used a seat from a tour bus.

Your pictures are micro, if this is what you are talking about they don't have feet to attach them to anything. The stock feet that come with these Ibis MDL ICS69 bars are too big for a CUCV or duce for that matter. There are other feet out there that you can get that will work.

I picked up a M101A1 last year from Ft Riley mainly because it had new STA super lugs and a spare all were a little low so air up and towed it home. A week or so later they were all low again, air them up then low again. I got out the duckbill and spoons to break them down thinking maybe they...

Stryker100 the rounded triangle MWO tags can be for little upgrades also, such as adding seat belts.